Specifications

REAR PANEL
INSERTS 1-4 (1-8 ON THE SM16)
An insert point is provided for each
Mono Channel on the SM12 and SM16
mixing consoles. These insert points are
a split of the channels input signal
which is post input gain and Low cut
filter with the return path pre EQ. These
inserts are 6.35mm TRS sockets with Tip
being send and ring being return.
Tip = Send, Ring = Return
38
41
42
39 40
SM12 & SM16 OPERATION MANUAL PAGE 7
POWER
This switch turns mains power "on" to
the mixer
AC POWER
This is the connection for the supplied
AC power supply.
Please use supplied mains
power supply only. Always
connect the power supply to the
mixer before connecting to the
mains supply.
PHANTOM
This switch turns 48 volt phantom power
"on" to all mono channels. Phantom
power is required for Electret or
Condenser style microphones
STEREO OUT
Both balanced XLR and 6.35mm TRS
jacks are included and provide Stereo
mix output at the level set by the Master
output fader. Both sets of outputs can
be used simultaneously.
41
42
40
39