Specifications

MONITOR SPEAKER
A 2.5” speaker is located behind a cloth
grille. No cleaning is required.
MONITOR SPEAKER
VOLUME CONTROL
This knob controls the volume level of the
monitor speaker.
NOTE: The Speaker Volume
Control does not affect the
level of the VU indicator nor
does it affect the amplifiers
or speaker lines that are
connected to the MP8.
VU METER
This meter indicates the output level
of the currently selected amplifier.
The 0dB level is referenced to 100V.
This is an RMS meter, not a peak meter.
SELECTOR SWITCHES
These switches select which amplifier
is connected to the monitor and meter
circuits. The switches are mechanical
interlocking push buttons, meaning that
when one button is pushed, the previously
selected switch is mechanically
deselected.
SELECT INDICATOR
This LED indicator will illuminate to show
which amplifier is selected for monitoring.
SIGNAL PRESENT
This LED will light dimly when the signal
from the corresponding amplifier reaches
approximately -24dB (6.3Vac) indicating
signal is present and will get progressively
brighter with increased signal level.
NOTE: Signal present indication
is irrespective of which amplifier
is selected. This indicator is
a passive circuit across the
amplifier input and will indicate
signal across each speaker
line even when the MP8 is
not powered.
LABELS
This area is available to custom label the
zones each amplifier is driving.
POWER SWITCH
This switch switches power from the
AC/DC plug pack input.
NOTE: When using 24VDC IN
terminals the unit is on
regardless of switch position.
POWER ON LED
This indicates there is power to the unit.
NOTE: When using 24VDC IN
terminals the power LED will
always be on.
☛
☛
☛
☛
PAGE 4 AMIS MP8 INSTALLATION & OPERATION MANUAL
FRONT PANEL
1
4
5
6
7
8
9
2
3
2 3 41 7 8
9
5 6