Specifications

INTRODUCTION AND CONTENTS
AMIS MP8 INSTALLATION & OPERATION MANUAL PAGE 3
The Australian Monitor Installation Series MP8 is a 2 RU monitoring
panel that allows you to monitor any of up to 8, constant voltage or
low impedance speaker lines.
This can be done via the on-board 2.5” monitor speaker or via the
8 segment VU meter. The MP8 also provides signal present LED’s for
each amplifier as well as LED’s to indicate which amplifier is currently
selected for monitoring.
The MP8 operates from either an AC/DC 12V-24V plug pack or via 24
VDC & boasts ample label space.
We thank you for choosing Australian Monitor Installation Series &,
as with all our products, the MP8 contains many clever features
& is contractor friendly.
INTRODUCTION 3
FRONT PANEL 4
REAR PANEL 5
INSTALLATION 6
OPERATION 7
DIMENSIONS 8
BLOCK DIAGRAM 9
SPECIFICATIONS 10
This symbol is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence
of important operation and maintenance (servicing)
instructions in the literature accompanying the appliance.
To prevent electric shock do not use this (polarised) plug
with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade exposure.
To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
Caution:
AUS, EUR, USA
Copyright 14th Apr 2003
Rev A: 14th Apr 2003
Rev B: 11th Aug 2004
Rev C: 17th Sep 2005