Specifications

PAGE 3AMIS MP8 INSTALLATION AND OPERATION MANUAL
MP8
The Australian Monitor Installation Series MP8 is a 2 RU monitoring
panel that allows you to monitor any of up to 8, constant voltage or
low impedance speaker lines.
This can be done via the on-board 2.5” monitor speaker or via the
8 segment VU meter. The MP8 also provides signal present LED’s
for each amplifier as well as LED’s to indicate which amplifier is
currently selected for monitoring.
The MP8 operates from either an AC/DC 12V-24V plug pack or via
24 VDC & boasts ample label space.
We thank you for choosing Australian Monitor Installation Series
and, as with all our products, the MP8 contains many clever
features and is contractor friendly.
AUS, EUR, USA
Rev D: Oct 2014
INTRODUCTION 3
FRONT PANEL 4
REAR PANEL 5
INSTALLATION 6
OPERATION 7
DIMENSIONS 8
BLOCK DIAGRAM 9
SPECIFICATIONS 10
NOTES 11
WARNING!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH
AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT & FULLY INSERT.
CAUTION
THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT
CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
For European Union countries: This symbol on
the product or its packaging indicates that this
product must not be disposed of with other waste.
Instead, it is your responsibility to dispose of your
waste equipment by handing it over to a designated
collection point for the recycling of waste electrical
and electronic equipment.
Please contact your local authority for further details
of your nearest designated collection point.
Rating plate and caution marking are marked on the back enclosure of the apparatus
INTRODUCTION AND CONTENTS