Technical information

Instruments
OLS7315
Function Optical Light Source
Wavelengths: 1310nm
Sensitivity / Output Power: -6.5dBm +/- 0.5 dB
Uncertainty / Stability @ 20°C:
+ or - 0.05dB in 15 minutes
+ or - 0.10dB in 8 hours
Optical interface: SC/APC adaptor
Detector / Emitter type: Fabry-Perot LD
Power supply: 9VDC rechargeable batt.
Auto OFF time: not applicable
Battery operating time: 8 hours
Weight: 160g
Dimensions: 150x74x25mm
OPM6010
Function Optical Power Meter
Wavelengths: 850, 980, 1310 or 1550nm
Sensitivity / Output Power: 2–60 ~ dBm +10 dB
Uncertainty / Stability @ 20°C: + or - 5%
Optical interface: FC adaptor
Detector / Emitter type: InGaAs
Power supply: 9VDC rechargeable batt.
Auto OFF time: 10 minutes
Storage temperature: -25 ~ +70 °C
Battery operating time: 28 hours
Weight: 250g
Dimensions: 150x76x26mm
OPTICAL POWER METER & LIGHT SOURCE
Robust handheld Optical Power meter and Light Source. Essential for checking power levels in Fibre Optic equipment.
Attractive pricing puts Fibre measurements within the reach of
most technicians.
TC870C
Comfy hand held shape•
Measurement range 46-870 MHz•
TV and FM demodulation via loud speaker•
Channel plans include Australia, New Zealand and Australian •
CATV providers
Measures in dBμV, dBm, dBmV•
Level accuracy +/- 1.5dB, range 30–115dBμV•
Direct entry of frequency and FM demodulation permits FM •
antenna alignments
CATV Trunk-line voltage and C/N measurement•
Rechargeable internal Ni-MH battery with low level warning•
Includes a soft field bag with belt clip •
A reliable meter that
masures signal level properly,
now less than $150! +GST!
TV SIGNAL METER
Catalogue 106
100