Technical information

Diplexers, Filters & Passives
MM214
Mix or separate 950-2400MHz 1st I.F. and
5-862MHz. ≤-.1dB TV, ≤-.3dB SAT.
SATELLITE IF/TERRESTRIAL DIPLEXERS
PayTV
Approved
PayTV
Approved
Pa
A
p
BS30
BS20
Mix or separate 950–2050MHz 1st I.F. and 40-860
MHz. Power pass to SAT port. Low cost high spec.
BS30
Mix or separate 1st I.F. and 40-860 MHz. Use a pair
to mix and then separate. Traditional high spec.
ve
d
BS20
ANTENNA SWITCH
TERMINATORS
AISW2
2 way antenna switch, F connector. .5dB insertion
loss with >50dB isolation, RF and IF. Permits weak
and strong signals to coexist, with quality leads.
Extra signal and narrower beamwidth are achieved by
stacking antennas with practically nil insertion loss! A clever
way to reduce multipath and sidelobes whilst optimising front
to back ratio. Equal lengths of antenna coax required when
stacking antennas.
TMU/2
UHF Band 4 and 5, 2 way stacking coupler +3dB,
outdoor design, cover excluded.
TMU/4
UHF Band 4 and 5, 4 way stacking couplers +6dB.,
outdoor design, cover excluded.
ANTENNA STACKING COUPLERS
TMU/4
SD300300 300ΩUHF/300ΩVHF out, 75Ω in.
SD30075 300ΩUHF/75ΩVHF out, 75Ω in.
SD7575 75ΩUHF/75ΩVHF out, 75Ω in.
SET DIPLEXERS
FC7014
AIDCBT
TE75PAL
TE75SC
FC7014 F connector 75Ω terminator, 5–1,000MHz.
AIDCBT
F Connector 75Ω DC blocking terminator,
5–3000MHz.
MM-DV25 F connector 75Ω terminator for satellite.
TE75PAL PAL Male terminator.
TE75SC Screw and Clamp terminator.
Tech Tip:
End of line or last tap out must be terminated to 75Ω with a terminating
resistor to ensure stable system function.
AID
CBT
Catalogue 106
82