Technical information

Diplexers, Filters & Passives
MM207
VHF/UHF diplexer, F Type weatherproof.
VHF: ≤-.4dB, UHF: ≤-.8dB.
MM307
VHF/UHF/UHF diplexer, F Type weatherproof.
VHF: ≤-.5dB, UHF ≤-4.5dB.
Fully shielded metal housing. Plastic cover for weather proofing.
MX51HLF
VHF High/Low F Type
diplexer.
MX61UVF VHF/UHF F Type diplexer.
MXAOF
Ch.0 /2–69 F Type
diplexer. Improved filter
design and F connectors
in full shielded case.
DPOUV
VHF/UHF Diplexer. Screw and saddle connections.
Optional Power pass on either input.
DPOUVF
VHF/UHF Diplexer. F Type connections. Optional
Power pass on either input.
DPX3
Mix Channels 0–6 with 9–11. (181/195MHz
crossover freq.) 1dB through loss.
DPX4
Mix Channels 0–7 with 11 (188/215MHz crossover
freq.) 1dB through loss.
DPX6
Mix Channels 0 with 2–11 (53/63MHz crossover
freq.) 1.5dB through loss.
M1-4/5FV
Mix bands 1 to 4 with band 5. ≤1dB insertion loss.
Power pass on both inputs.
Useful in capital cities to mix local signals from modulators etc.
with off air signals. Diecast metal housing.
ESVU VHF/UHF diplexer, Power pass on UHF input.
ESVU2 VHF/UHF diplexer, Power pass on VHF input.
ES345/32
Au ch.20–28 UHF Low, Au ch.33–75 UHF High and
B3, 3 input mixer, Power pass UHF High, Trap B1
and 2.
ES345/39
Au ch.20-35 UHF Low, Au ch.41–75 UHF High and
B3, 3 input mixer, Power pass both UHF, Trap B1
and 2.
ES345/43
Au ch.20–43 UHF Low, Au ch.45–75 UHF High and
B3, 3 input mixer, Power pass B3 to UHF High, Trap
B1 and 2.
ESL3U
UHF, B3 and B’s 1 and 2, 3 input mixer. Band 3
-3dB at Au ch. 5A. Power pass UHF.
ESV45
Au ch.20–36 UHF Low, Au ch.40–75 UHF High and
VHF, 3 input mixer. Power pass UHF High.
ESV45S
Au ch.20–32 UHF Low, Au ch.38–75 UHF High and
VHF, 3 input mixer. Power pass UHF High.
ESVUU
UHF, UHF and VHF, 3 input mixer. Power pass
1 UHF port. (-4dB UHF as UU mix is wide band!).
MVUFV
Diplexer F Type, VHF: 0.6–350MHz, insertion loss
0.4dB. UHF: 350MHz–900MHz, insertion loss 0.5dB.
Power pass to VHF port. Diecast zamac housing.
Quality Screw Clamp Multiplexers
Catalogue 106
81