Technical information

Diplexers, Filters & Passives
Higher isolation and return loss 900HMz splitters. Port positions enable neater results and better weather protection.
RF shielding ≥120dB.
All Port Power pass splitters. Quality construction. Higher
isolation and return loss. Port positions permit neater results and
better weather protection. Shielding ≥120dB.
PA2 2 way, Split Loss ≤5.5dB, Isol. ≥20dB. 5–2400MHz.
PA3 3 way, Split Loss ≤10dB, Isol. ≥22dB. 5–2400MHz.
PA4 4 way, Split Loss ≤11dB, Isol. ≥26dB. 5–2400MHz.
PA6 6 way, Split Loss ≤13.5dB, Isol. ≥22dB. 5–2400MHz.
PA8 8 way, Split Loss ≤15.5dB, Isol. ≥20dB. 5–400MHz.
All Port DC pass via diode control. High quality PCB
construction with high isolation and return loss. Port positions
result in easier installation in smaller spaces. Shielding ≥120dB.
AISP2 2 way, Split Loss ≤5.5dB, Isol. ≥20dB. 5–2400MHz.
AISP4 4 way, Split Loss ≤11dB, Isol. ≥26dB. 5–2400MHz.
2GHz SPLITTERS
solation
and
return
loss.
Por
t p
ositions
per
mit
neater
results
and
b
etter weather protect
i
on. Sh
i
eld
i
n
g
≥120dB.
5–2,050MHz Premium Quality Inductive splitters with all input
and output ports on one side. All port Power pass with Diode
Control. High Return Loss. Loss and Outlet to Outlet isolation
shown at 1,750MHz.
SP22GDV
2 way, Split Loss ≤5.5dB, Isol. ≥20dB.
PayTV approved.
SP32GDV 3 way, Split Loss ≤10dB, Isol. ≥22dB.
SP42GDV 4 way, Split Loss ≤10dB, Isol. ≥22dB.
Tech Tip:
Splitters with Diode Controlled Power pass permit any receiver connected
to power the LNBF. However the higher voltage will rule the polarity switch.
Alternately the One Port Power pass solution requires the receiver connected
to the Power pass to always be connected if the other receivers are to
function.
Low loss 900–2,050MHz Strip Line splitters with slightly higher
attenuation over 40–860MHz. Quality without a high price tag.
SP6125
2 way Satellite Splitter, Power pass All Ports,
Diode Control.
SP6126 2 way Satellite Splitter, Power pass 1 Port.
SP6127
4 way Satellite Splitter, Stripline technology, Power
pass All Ports.
SP275FPV
2 way F type, power pass
one port. Insertion loss
-3.5dB @ 500MHz.
SP475FPV
4 way F type, power pass
one port. Insertion loss -7dB
@ 500MHz.
SP375FPV
3 way F type, power pass one
port. Insertion loss -3.5, -3.5,
-7dB @ 500MHz. Unbalanced.
rp
ass
Catalogue 106
77