Technical information

Antennas & Mounting Hardware
GUYING HARDWARE
GW180/7.90 Guy Wire 180m 7 strands each .9mm.
GW30/6X1.12 Guy Wire 30m 6 strands each 1.12mm.
Guy Wire
SE3 Screw Eye 3” Zinc Plated.
SE4 Screw Eye 4” Zinc Plated.
SE5 Screw Eye 5” Zinc Plated.
SE7 Screw Eye 7” Zinc Plated.
Screw Eyes
NUTS, BOLTS & WASHERS
CB3825P
Cup Square Bolt 3/8” x 2 & 1/2” plated.
Square shoulder, round head, for timber or steel.
CB382P Cup Square Bolt 3/8” x 2” plated.
CS3815 Coach Screw 3/8” x 1 & 1/2”.
CS382 Coach Screw 3/8” x 2”.
CS3825 Coach Screw 3/8” x 2 & 1/2”.
CS51615 Coach Screw 5/16” x 1 & 1/2”.
CS51625 Coach Screw 5/16” x 2 & 1/2”.
DNP10
Wall Plug. Use CS51615 in mortar or brick etc.
10mmØ hole 60mm+ deep.
DNP12
Wall Plug. Use CS3825 in mortar or brick etc.
12mmØ hole 75mm+ deep.
HN14P 1/4” Hexagon Nut, plated.
HN38P 3/8” Hexagon Nut, plated.
HN316P 3/16” Hexagon Nut, plated.
HN516P 5/16” Hexagon Nut, plated.
HW13M4 Hollow wall anchor, 4mm threads.
RS1265
Roofers Screw galvanised, with neoprene washer.
12 gauge 65mm long. For corrugated iron roof.
SAM840 8 x 40mm Sleeve Anchor, plated.
SAM890 8 x 90mm Sleeve Anchor, plated.
SAM1050 10 x 50mm Sleeve Anchor, plated.
SAM1075 10 x 75mm Sleeve Anchor, plated.
SB1060
Screwbolt. Screws directly into concrete, 10mmØ
hole 60mm+ deep.
SC3162
Screw 3/16” x 2” zinc plated, pan head
replacement antenna screw.
SC316175
Screw 3/16” x 1.75” zinc plated, pan head
replacement antenna screw.
SS3825P
Set Screw 3/8” x 2 & 1/2”, plated thread up the
shank to a hexagon head.
WN316 Wing Nut 6”, plated.
WS316ZP 3/16” Washer, plated.
WS14ZP 1/4” Washer, plated.
WS516ZP 5/16” Washer, plated.
WS38ZP 3/8” Washer, plated.
WSC516 Cyclone washer.
RS1265
HW13M4
SAM840
CS3815
DNP10
HN14P
WN316
WS316ZP
CB3825P
SS3825P
SC3162
Catalogue 106
28