Technical information

RMI Ridge Mount Iron. Iron roof ridge cap mast foot.
RMT120 Ridge Mount Tile. Tile roof 120° ridge cap mast foot.
Ridge Mounts
RMI
RMT120
All Ridge Mounts are galvanised.
Antennas & Mounting Hardware
Tech Tip:
SILPRG along tops of corrogated iron should be used when fitting TRM IRON
to reduce corrosion.
Tripod Mounts
VPB1
Support for up to 32mmØ crossbar.
The strongest crossbar support of it’s kind.
VPB2 Vertical Mount Assembly, crossbar support.
Vertical Cross Bar Mounts
VPB1
VPB2
FWM
Flat Wall Mount. Two will fix masting to wall with
less than 5mm over hang from flashing etc.
Complete with 2 x vee blocks.
Flat Wall Mount
RAWM
Simple wall mount complete with U bolt and nuts
for up to 47mm (2&1/4”)Ø masting. Size is only
150mm x 95mm (25 x 5mm bar), with 3 x ≤9mmØ
mounting holes 55mm centre to centre, and 3
x masonry fixings for 8mm drill and 40mm long
screws. Passivated zinc finish.
2 required for most applications.
Right Angle Wall Mount
TRM IRON
Iron Roof Tripod Mount for freestanding fitting of
light weight antennas in ‘sweet spots’. Includes
1.2m mast.
TRM TILE
Tile Roof Tripod Mount for freestanding fitting of
light weight antennas in ‘sweet spots’. Includes
1.2m mast. Holes allow for fixing to batten with
roofing screws etc.
TRIKIT
New tile roof mount. Special Z brackets allow
no penetration of the tiles. Quick, Water proof
mount mast not included.
TRIP1.8 Tripod Mast 1.8m. To suit TRIKIT.
TRI STRAMIT TRI KIT option. Mounting foot with bolt.
TRI KIT
TRM TILE
TRM IRON
TRI STRAMIT
Catalogue 106
27