Technical information

Antennas & Mounting Hardware
EM230
Eave Mount 230mm x 25mmØ. Fitted with offset V
block and U Bolts. Galvanised.
EM280
Eave Mount 280mm x 25mmØ. Fitted with offset V
block and U Bolts. Galvanised.
EM460 Eave Mount 460mm x 25mmØ. Galvanised.
EM690 Eave Mount 690mm x 25mmØ. Galvanised.
EM1020 Eave Mount 1.02m x 25mmØ. Galvanised.
EM1500 Eave Mount 1.5m x 25mmØ. Galvanised.
Eave Mounts
M1825 1.8m x 25mmØ (6’x1”).
M1832 1.8m x 32mmØ (6’x1&1/4”).
M2425 2.4m x 25mmØ (8’x1”).
M2432 2.4m x 32mmØ (8’x1&1/4”).
M3032 3.0m x 32mmØ (10’x1&1/4”).
M3632 3.6m x 32mmØ (12’x1&1/4”).
M4532 4.5m x 32mmØ (15’x1&1/4”).
M4538 4.5m x 38mmØ (15’x1&1/2”).
M61476 6.1m x 47.6mmØ (20’).
Masting
BH900
Bullhorn 900mm x 25mmØ. With U Bolt and V Block in centre of masting. Fits
masting up to 56mmØ.
DVM1
Double Vertical Mount, 1.0m x 25mmØ.
Use for any two vertically polarised antennas.
HSB45 Horizontal Stand-off, 450mm x 25mmØ. Fits masting up to 56mmØ.
HSB90 Horizontal Stand-off, 1.0m x 25mmØ. Fits masting up to 56mmØ.
HVSB90
Horizontal and Vertical Stand-off, 900mm x 25mmØ.
Fits masting up to 56mmØ.
Standoff Mounts
HSB45
BH900 HSB90
HSVB90DVM1
Eave Mount Kit
EMK Eave Mount Kit. 1 x 230mm x 25mmØ eave
mount, 1 x 690mm x 25mmØ eave mount, 2 x
5/16” U bolts, nuts, washers & 1 x offset vee block.
Short mount fixes to fascia board, longer to
brickwork below, to support up to 4.5m of
masting. Offset vee block allows use with almost
any dimension between fascia board and wall.
Masting Caps
CAPM25 Cap suits any 25mmØ tube.
CAPM32 Cap suits any 32mmØ tube.
CAPM38 Cap suits any 38mmØ tube.
CAPM25
CAPM32 CAPM38
Catalogue 106
24