Technical information

Antennas & Mounting Hardware
Pre-amplifier — fits the AP369F antenna, inside the balun
casing to amplify every microvolt the antenna develops. As
the magic is done between the antenna and the first chip, the
output can then be further amplified with less noticeable loss
of quality.
BR411 12V DC, +14dB gain, noise figure 1.4dB.
BR441 5V DC, +14dB gain, noise figure 1.4dB.
The weak TV signal team
Channels: 28–69, bands 4&5
Gain: 13.5dB
F/B Ratio: 20dB
Dimensions: 83.5x68cm
Mounting
Bracket:
New easy to assemble construction and tool
less install, mounting bracket suits masting
from 20 to 60mmØ with vertical polarity.
AP369F
Channels: 28–69, b4&5
Gain: 16dB
F/B Ratio: 26dB
Dimensions: 88.5x72cm
PU8F
Horizontal pre stack
Now shipping
with F Connector!
Channels: 28–69, bands 4 & 5
Gain: 16dB
F/B Ratio: 26dB
Dimensions: 156x40cm
PU8VF
Vertical pre stack
Now shipping
with F Connector!
Deep DEEP Fringe
PU16F
Tech Tip:
PU16 and PU8 can lift terminally weak or diffused signal. As well as a larger
capture area, they give extra gain, narrower beamwidth and higher front
to back ratio than a single phased array antenna. Mount PU16 securely as
movement of narrow beamwidth antennas can cause signal fade.
Channels:
28–69
Gain:
18.5dB
F/B Ratio:
28dB
Dimensions:
167x72cm
Now shipping
with F Connector!
Now shipping
with F Connector!
Catalogue 106
21