Technical information

Satellite Equipment
SJA 24 inch (61cm) stroke length Linear Actuator
with Reed Sensor. Works with SJVB or analogue
positioner interfaces to reliably move a bigger
dish across your sky.
HDT1500 Universal Satellite Mount for wall and roof.
SATGM Single leg Satellite Gutter Mount.
EZYGMOUNT
45mmØ rigid dish mount. Stands 600mm from
gutter, rafter fixing. Ships with screw kit and
instructions. 900mm EZY-G/MOUNT-L available
to order.
SATWM
Wall Mount. Mounts on timber, brick, concrete
or almost any vertical wall surface with sleeve
anchors or coach screws etc. (not included).
Simple yet extremely functional for dishes up
to 90cm.
SATFM
Flexi Mount. Roof mount with stay bars that adjust
in length between .8 and 1.4 metres, to suit your
job. Fixing kit includes self tapping screws to
lock stay bars, metal roof screws and weather
proofing washers. Stay bars shown at minimum
length and without locking screws.
SATELLITE HARDWARE
SJVB
DiSEqC positioner interface box. Enables any
DiSEqC 1.2 equipped receiver to control a bigger
dish using a Linear Actuator. Stores up to 48
positions. Dishes easily fine tuned. Software and
hardware dish travel limits. Mains powered, 36V
DC @ 90W max. output, overload protected.
SJMM
Improved complete DiSEqC positioner. Interprets
DiSEqC 1.2 instructions to position any dish up
to 1.2m in diameter. H to H mount with high
resolution hall effect sensor. Manual East West
buttons simplify set up.
Connects directly between DiSEqC 1.2 receiver
(or optional interface Vbox) and LNB. Up to
75mmØ mount, 55mmØ dish mount.
Catalogue 106
145