Technical information

MATV, SMATV & CCTV
High output level and low power consumption using GaAs •
FET hybrid technology.
Gain and tilt adjustable with attenuators (AMP522AL–•
AMP522AM) or using PAD (AMP522PL–AMP522PM).
Mains or Line Powered with internal switch mode power •
supply.
Integrated active or passive return path, switchable.•
Die-cast aluminium housing provides IP65 protection.•
5A AC feed through to any port and 10A external AC input •
terminal.
Excellent surge and transient protection.•
Order relevant accessories to meet your requirements:
2 x diplexer filter modules MDA (see below), or if return •
path is not required replace with two ML02 link modules.
Amplifiers supplied with PG11 threads, for adaptors see p. •
137.
AMP522Ax: 1 x interstage module MEX, if filtering is not •
required replace it with one ML01 module.
FRACARRO CATV AMPLIFIERS
CATV
AMP522AM
Mains powered CATV amplifier. Bandwidth
47–862MHz, Gain 30dB VHF, 38dB UHF. Gain
adjustment 0-18dB via attenuators. Linearity
±1dB, mains power voltage 175-260Vac.
AMP522AL
Line powered CATV amplifier. Bandwidth
47-862MHz, Gain 30dB VHF, 38dB UHF. Gain
adjustment 0–18dB via attenuators. Linearity
±1dB, Voltage 24–65Vac, line power current
540–250mA.
PS6A-60 Power supply for AMP522AL 6AMP.
MDA3047 CATV AMP5222 Diplexer 47–862MHz.
MDA6587 Forward and return path diplexer 65–862MHz.
AMP522.. Diplexer Modules
Diplexer filter modules for use with the AMP522 amplifier
range to mix/demix the return path and forward path.
MDA3047
AMP522.. Splitter Modules
MS100
MS100 Output splitter for AMP522 series amplifiers.
MS206
Output tap 3.5dB–3.3dB for AMP522
series amplifers.
Splitter modules for use with the AMP522 amplifier range to fine
tune output values.
Catalogue 106
137