Technical information

MATV, SMATV & CCTV
The OPT-TX51 and OPT-RX51 are part of a new range of optical transmitters and receivers. Unlike standard optical equipment,
the OPT-TX51 converts and distributes terrestrial and 4 satellite polarities through one Single Mode fibre, saving time and money
in installation. The OPT-RX51 converts the terrestrial and satellite signals back to RF for further distribution. Ideal for long distance
signal distribution. Only one fibre optic cable required for all signals (SAT, DTT, analogue, CCTV, Ethernet etc.)
Ideal for long distance distribution•
Electrical isolation between equipment•
Resistant to water and humidity•
Immune to electromagnetic interference•
Low power consumption, low impact on the environment•
FRACARRO FIBRE OPTIC
FIBRE OPTIC SOLUTIONS
OPT-RX51 Receiver
Fibre ports 1 out + 1 out aux
Wave length 1260-1600nm
Output power 10dBm
Bandwidth 47-2200MHz
Gain 4dB
Max input level 117dBμV
Power Supply Vac, Hz 220-240, 50-60
OPT-TX51 Transmitter
5 Polarities, only 1 Fibre!
10dBm
Fibre ports 1 input + 1 in aux
Wave length 1260–1600nm
Input power -12 to +5dBm
Bandwidth 47-2200MHz
Gain 4dB
Max output level 110dBμV
Power Consumption mA@14V 260
Power Supply Vac, Hz 14–18V from multiswitch
Tech Tip:
To achieve the long distances possible with FO, we recommend Single Mode fibre be installed.
Features:
4 satellite polarities (950-2200MHz) and terrestrial bandwidth (47-862MHz) •
transmitted using just 1 fibre optic cable
HD compliant•
DVB-S, DVB-S2, DVB-T and DVB-T2 compliant•
Auxiliary input/output for additional services/devices (Ethernet/TVCC/….)•
Can supply up to 300mA on SAT inputs•
High RF input level•
Remotely powered from a multiswitch•
Catalogue 106
134