Technical information

MATV, SMATV & CCTV
QPSK receivers with Common Interface slot to receive free-to-
air or encrypted digital satellite programs available on audio/
video outputs with RCA (cinch) connectors. The SIG7340
module has also a TS output on the back panel. Loop-through
output for the connection of several receivers on the same SAT
polarity.
CI slot available to decode the encrypted programs. •
Compatible with more than 150 existing CAMs.
Module can be used as a second CAM card.•
Generate 14 or 18V, 22 KHz tone and DiSEqC 1.0, suitable •
to power LNB or to control multiswitch output.
Programmable via FHM software.•
SIG7340
QPSK receivers with audio/video outputs on RCA (cinch)
connectors to receive free-to-air digital satellite programs.
The SIG7330 module has also a TS output on the back panel.
One input and one loop-through output for the connection of
several receivers on the same SAT polarity.
LNB supply, 14/18V 0/22KHz, DiSEqC 1.0•
Software download possible at the installation site.•
Programmable via FHM software.•
SIG7330
Ideal solutions for regeneration of DTT signal.•
Enables the audio/video signal to be available as a TS •
MPEG2/MPEG4 form distributed from the back panel.
Loop-through input for the connection of several receivers •
on the same SAT polarity
Remote configuration and monitoring (via SIG7905 •
controller host and FHM software.
HD compliant.•
SIG7531
TO
PAL
OR
TS
COFDM receivers to distribute free-to-air digital terrestrial
programs. They can also be installed as a single unit to
distribute one program through RCA outputs (for MPEG-2
compressed programs).
HEADLINE PROFESSIONAL HEADENDS
HEADLINE TS—QAM OR ASI
SIG7111
SIG7282S
Stereo audio, fully agile Vestigial Side Band
modulator. Output selectable between 47 and
862MHz. Double conversion, double SAW filters
and tracking filter create very high C/N ratio in
band that allows the distribution of more than 80
channels. Manage remotely via SIG7905.
SIG7282
PAL B/G mono, fully agile Vestigial Side Band
modulator. Output selectable between 47 and
862MHz. Double conversion, double SAW filters
and tracking filter create high C/N ratio in band
that allows the distribution of more than 80
channels. Manage remotely via SIG7905.
VSB Modulators
TO
PAL
AV
QAM Modulator with ASI input on the front panel.•
Remote configuration and monitoring.•
HD Compliant.•
MPEG4/MPEG2 Compliant.•
The SIG 7111 modulates a signal received from the ASI input to DVB-C standard
(using QAM modulation). It can be used to modulate different analogue
signals coming from the SIG7404 encoder or to modulate Transport Stream
available on the back panel from digital receivers.
TO
ASI
TO
PAL
OR
TS
/
TO
PAL
OR
TS
/
Catalogue 106
125