Technical information

MATV, SMATV & CCTV
VSB modulators suitable for adjacent channels distribution.
Very clean output ideal for medium to large headends.
VSB MODULATORS
DIGITAL TO ANALOGUE MODULATORS
KMS
Modulator stereo VHF/UHF VSB modulator, full
band output (47-862MHz) with true Stereo. S
band included. Suitable for adjacent channel
distribution. Output level 90dBµV (adj. -15dB via
TPE). RCA audio and video input connectors.
Mechanical electrical and RF compatibity with KF
and K120 series single channel amplifiers.
KCMU
Modulator mono UHF VSB modulator, all UHF
band output (470-862MHz). Output level 90dBµV
(adj. -15dB via TPE). RCA audio and video
input connectors. Mechanical electrical and
RF compatibity with KF and K120 series single
channel amplifiers.
KCMU/S
Modulator stereo UHF VSB modulator, all UHF
band output (470-862MHz) with true Stereo.
Suitable for adjacent channel distribution. Output
level 90dBµV (adj. -15dB via TPE). RCA audio and
video input connectors. Mechanical electrical
and RF compatibity with KF and K120 series single
channel amplifiers.
KCMV/S
Modulator stereo VHF VSB modulator all VHF band
output (174-382MHz) with true Stereo. Suitable
for adjacent channel distribution. Output level
90dBµV (adj. -15dB via TPE). RCA audio and
video input connectors. Mechanical electrical
and RF compatibity with KF and K120 series single
channel amplifiers.
LNB POWER SUPPLIES
K1-2
LNB power supply and 1st IF splitter, 14V or
18V DC @ up to 250mA and 22KHz tone. at 2
outputs @-5dB. 12V DC@500mA.
K2-8
Twin LNB power supply and active splitter.
Divides signals from 2 LNB inputs four ways, 0dB
insertion loss. Provides 14V or 18V LNB supply
and 22KHz tone. 12V DC@620-750mA.
TO
PAL
KDTR-S
Receives a digital multiplex and converts one
service into an analogue channel. Ideal for
medium to large distribution systems such as
motels, hotels or hospitals with analogue TVs.
Full band modulator distributes signals from
47–862MHz. VSB modulator allows adjacent
channel distribution. RCA connectors with
audio/video signal available on all versions.
KDTS/VL-C2
Converts digital satellite signals to more robust
QAM for distribution around a cable system.
CA transparent. Set up with KTP programmer.
Max output level 90dBµV.
KDF
Highly stable Free To Air DVB-S QPSK receiver.
Symbol rates from 2–35 MS/s for receiving
SCPC and MCPC signals. Automatic PID
update ensures A/V synchronisation and
reduces service calls for broadcaster
parameter changes. Modulator for VHF and
UHF output.
KDFU
Highly stable Free To Air DVB-S QPSK receiver.
Symbol rates from 1-45MS/s for receiving
MPEG2 signals. UHF output modulator.
TO
PAL
Catalogue 106
118