User Manual

TR OU BL ES HO OT IN G GU ID E
TROUBLE LIKELY CAUSE REMEDY
Power LED not on Power not reaching unit Check mains connection
Check mains fuse
Distorted sound Output is being over driven Reduce output volume
No sound but amp is on Volume turned down Check volume controls
I N S TA L L AT I O N & T R O U B L E S H O O T I N G
PA G E 5
A M I S H A 6 I N S TA L L AT I O N & O PE RAT I O N M A N UA L
INPUT CONNECTIONS
For wiring balanced in, pin 2 is hot. Balanced input wiring (shielded
pair cable) is recommended.
Unbalanced RCA wiring should be keep as short as possible. Typically
less than 3m.