User Manual

1 PROG 1 - 4 Input Section
LINE
MIC
PROG GAIN
The pair of RCA sockets accepts unbalanced line level inputs.
Stereo signals are internally summed to mono.
The XLR socket accepts balanced microphone level signals.
The trimpot controls the input gain of BOTH the balanced and
unbalanced program inputs. In a Master/Slave configuration,
these also control program linked inputs. (see Linking Section)
3. BACK PANEL
1
23
5
4a
8
6
7
PROG 1PROG 3 PROG 2PROG 4
PROG LINKS
MICMIC MICMIC
LINELINE LINELINE
PROGPROG PROGPROG
GAINGAIN
INPUTOUTPUT
GAINGAIN
+ 24V DC
GROUND
COMMON
ALERT
EVAC
GROUND
SUM IN
RUN 1RUN 2RUN 3RUN 4DATA LINK
CAT 5CAT 5CAT 5CAT 5
SUMTONE GEN
INPUTOUTPUT
LEVELLEVEL
SLAVE
MASTER
ZONE OUTPUTS
+24V
POWER IN
VDC
8
7
6
5
4
3
21
ENGINEERED BY AUDIO TELEX COMMUNICATIONS PTY LTD SYDNEY AUSTRALIA
NOTE: If connecting to an unbalanced input, the negative pin (3) should not be
connected to ground but left floating.
2 ZONE OUTPUTS
There is a balanced XLR line level output for each zone.
NOTE: When operating as a slave unit, outputs labelled 1 to 8 will correspond to
zones 9 to 16, respectively. (see Linking Section)
8
4b
PIN 2
HOT
+
PIN 3
COLD
-
PIN 1
GND
FEMALE XLR
PIN 2
HOT
+
PIN 3
COLD
-
PIN 1
GND
MALE XLR
INSTALLATION SERIES
Australian Monitor