BGM2 PROGRAM SOURCE SERIES INSTALLATION AND OPERATION MANUAL
IMPORTANT SAFETY INFORMATION 1. Save the carton and packing material even if the equipment has arrived in good condition. Should you ever need to ship the unit, use only the original factory packing. 2. Read all documentation before operating your equipment. Retain all documentation for future reference. 3. Follow all instructions printed on unit chassis for proper operation. 4. Do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. 5.
INTRODUCTION AND CONTENTS The Australian Monitor Installation Series BGM2 program source series are one rack unit, dual program source players that features either an AM/FM tuner & single disc CD/MP3 player (BGM2TCD), dual CD/MP3 players (BGM2DCD) or, dual AM/FM tuner modules (BGM2DT). The tuner module has one FM band & one AM band, with 10 user selectable preset stations, there is also a programmable sleep function for the tuner.
FRONT PANEL - CD/MP3 PLAYER 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ON LED This LED indicates that the unit is powered from the mains. CD/MP3 player 1 POWER 6 Turns only this CD/MP3 player on or off. 2 PROG 7 This works with conventional CD's only and does not apply to MP3 recorded disks. Allows you to program up to 20 tracks to play in the order you program. The program order is not saved and will be cleared when you press STOP.
FRONT PANEL - AM/FM TUNER 1 2 3 4 5 7 6 AM/FM Tuner 1 POWER Turns only this AM/FM tuner on or off. 2 BAND Changes between AM and FM bands. 3 SLEEP This button allows you to set a countdown timer to switch the tuner module off. It is set in increments of 10mins from 90mins down to 10mins. Pressing this button while in sleep countdown mode turns off the sleep function. 4 TUNE (UP/DOWN) Changes the tuner frequency. 5 MEMORY (UP/DOWN) Changes the preset number.
BACK PANEL Left side - Back Panel 4 3 1 Right side - Back Panel 1 2 DIRECT STEREO OUTPUTS These outputs provide direct signal from the modules. 2 3 ANTENNA These terminals provide connections for the antenna of each band. There will be two strips of terminals on the BGM2-DT, one for each module. PRIORITY The BGM2 features a STEREO PRIORITY OUTPUT, in addition to the separate Direct Stereo outputs for the modules.
SPECIFICATIONS SPEC. OF CD/MP3 PLAYER 1. Output Level @ 1kHz, 0dB 1.2V +/- 0.3V 2. Frequency Response 20Hz-20kHz +/- 2dB 3. Separation 1kHz, 0dB >60 dB 4. T.H.D+ Noise 1kHz, 0dB <0.05% 5. S /N Ratio >80 dB SPEC. OF AM / FM TUNER FM: 1. Tuning Range 87.5 MHz -108 MHz 2. IF Frequency & Rejection 10.7 MHz >80 dB 3. Image Rejection >25 dB 4. S/N Ratio 1mV/M Input 46db 5. T.H.D 1mV <1.0% 6. Auto Tuning Sens. <50uV AM: 1. Tuning Range 522kHz - 1620kHz 2.
AUSTRALIA AND NEW ZEALAND www.australianmonitor.com.au SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH AUCKLAND (NSW & ACT SALES) (VIC & TAS SALES) (QLD SALES) (SA & NT SALES) (WA SALES) (NZ SALES) 149 Beaconsfield Street Silverwater NSW 2128 Private Bag 149 Silverwater NSW 1811 Phone: (02) 9647 1411 Fax: (02) 9648 3698 Email: nsw@audiotelex.com.au 22/277 Middleborough Road Box Hill VIC 3128 PO Box 151 Blackburn South VIC 3130 Phone: (03) 9890 7477 Fax: (03) 9890 7977 Email: vic@audiotelex.com.
