Specifications

Specification Conditions
Frequency Response 70 Hz - 18 kHz, -3 dB Signal Input 2 dB below clip
Total Harmonic Distortion < 0.6 % Signal input 2 dB below clip
Input Impedance 11 k ohms
Max Input 21 dBu Gain pots adjusted accordingly
0 dBu Gain pots at maximum
Crosstalk > 70dB 1 kHz, maximum output
S/N Ratio > 92 dB A-weighted, 20 Hz to 20 kHz
Power Output
4 ohm 200 W 28 Vrms
70 V 200 W 25 ohms
100 V 200 W 50 ohms
Power Consumption
Green 12 W No USB or serial attached, 4 Ohm load
Idle 20 W No USB or serial attached, 4 Ohm load
1/8 power 92 W No USB or serial attached, 4 Ohm load
1/3 power 204 W No USB or serial attached, 4 Ohm load
Thermal Dissipation
Green 12W (40.94 BTu/Hr
Idle 20W (68.24 BTu/Hr)
1/8 power 42W (143.30 BTu/Hr) Pink noise 12 dB crest factor, typical of
program music just before clip
Power Source AC Mains (115-120 V 60Hz / 230-240 V 50Hz) Factory Configured
Recommended Operating Temp 10° C to 45° C (50° F to 113° F)
Recommended Operating Humidity 5 % to 95 %
Dimensions (w x d x h) 430 mm x 438 mm x 44 mm Not including rack ears or rear panel connectors
(16.9” x 17.25” x 1.75”)
Net Weight 11.5 kg (25.3 lbs)
Shipping Weight 13.5 kg (29.7 lbs)
Shipping Dimensions (w x d x h) 540 mm x 530 mm x 140 mm
(21.3” x 20.9” x 5.5”)
PAGE 11
AMD2200P INSTALLATION AND OPERATION MANUAL
SPECIFICATIONS