Specifications

PAGE 6 AMC
+
MIX SERIES INSTALLATION AND OPERATION MANUAL
INSTALLATION
OUTPUT CONNECTIONS
Line Output
The LINE output XLR can be used to connect up to 6 booster amplifiers.
Balanced wiring (shielded pair cable) is recommended.
NOTE: When wiring the LINE output as unbalanced, Pin2 should be wired as hot
and Pin1 should be wired as ground/shield. Do not wire Pin3.
Rec Output
The TAPE output wiring should be kept as short as possible. Typically less
than 3m.
Input Connections
For wiring balanced in, pin 2 is hot. Unbalanced wiring on the microphone
inputs is not recommended. Balanced input wiring (shielded pair cable)
is recommended.
Unbalanced RCA wiring should be keep as short as possible. Typically less
than 3m.