Owner's manual

www.austin-hughes.comUM-X-ISM-Q414V3 P.10
Installation for ( light-duty rod-latch )
2 - point Lock
1
2
3
4
Handle mounting screw set for 2-point lock ( light-duty )
1. Mount the smartcard handle to the universal mounting position.
2. Place the handle mounting bracket with M4 x 9mm screw x 2 to secure the handle.
3. Attach the Rod-latch with square hole washer(s) to adjust and to fi t the door top & bottom locking position.
4. Insert the M5 x 10mm screw x 1 with circle hole washer to secure the Rod-latch to the handle.
5. Place the U bracket with M3 x 10mm screw x 2 to further secure the handle in place.
1
3
2
4
Cabinet
door
>>>>>
Rod latch
>>>>>
Qty. 2-Point Lock
( light-duty )
Handle mounting bracket 2
M4 x 9mm screw for 4
Square hole washer 6
Circle hole washer w/ M5 x 10mm screw 2
U bracket 2
M3 x 10mm screw for 4
2
3
4
5
1
1
5
6
6 5
5
6
While insert the screws to secure
the handle with electronic screw-
driver, please set the torque NOT
exceed 8 kgf/cm