Owner's manual

www.austin-hughes.comUM-X-ISM-Q414V3 P.7
Please take the procedure no. 3 to 6 for all InfraBoxes ONE BY ONE.
5. Click “ Scan “ to search the connected InfraBox.
6. Change the IP address / Subnet mask / Gateway, then Click “ Save “ to confi m the setting of InfraBox.
The default IP address is as below :
IP address: 192.168.0.20
Subnet mask: 255.255.255.0
Gateway: 192.168.0.254
Write down the new IP address for < 10.2 > MFP - Master Floor Plan
< 2.2 > InfraBox X-1000 / X-2000
IP Setup for InfraBox