Instruction Manual

www.austin-hughes.comUM-X-600-ISM-Q214V2 P.46
< 9.7 > Remote Access
After software installation, administrator can turn on fi rewall of the management PC and set the inbound &
outbound rules of fi rewall.
Inbound rules :
1. Open “ Control Panel “
2. Select “ Windows Firewall “
3. Select “ Advanced settings “
4. Right Click “ Inbound Rules “ & select “ New Rules… “
5. Select “ Port “ & Click “ Next> “
6. Select “ TCP “ then input “ 80, 4000, 5432, 18081 “ in “ Specifi c local ports: “
7. Select “ Allow the connection “ & Click “ Next> “
8. Tick all three options & Click “ Next> “
9. Input the “ Name “ & “ Description “ of the port & Click “ Finish “
Outbound rules :
1. Open “ Control Panel “
2. Select “ Windows Firewall “
3. Select “ Advanced settings “
4. Right Click “ Outbound Rules “ & select “ New Rules… “
5. Select “ Port “ & Click “ Next> “
6. Select “ TCP “ then input “ 4001, 4003, 4006, outgoing SMTP port “ in “ Specifi c remote ports: “
7. Select “ Allow the connection “ & Click “ Next> “
8. Tick all three options & Click “ Next> “
9. Input the “ Name “ & “ Description “ of the port & Click “ Finish “
The port no. of outgoing SMTP
port depends on the mail server setting in < 11.2 >