dedicated KVM switch and rackmount screen technology User Manual 21.5” High Brightness FHD LCD 1000 cd/m² RP-HF821 8U Rackmount Display Panel Options : - SDI / MCS - AV / HDMI / Audio - Touchscreen / DC power - MIL-type or lockable connector 751 Designed and manufactured by Austin Hughes UM-CV-751-RP-HF821-Q215V1 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part. 1 > RP-HF821 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Installation P.1 P.1 - 2 P.3 - 4 < Part. 2 > Specifications / OSD / Remote Controller 2.1 2.2 2.3 Product Specifications On-screen Display Operation ( OSD ) Picture In Picture ( PIP ) / Picture By Picture ( PBP ) P.5 - 6 P.7 - 8 P.9 - 10 < Part. 3 > Options 3.1 3.2 3.3 3.4 3.5 3.6 3G / HD / SD-SDI Broadcast-grade input MCS Multi-display control solution AV3.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
< Part 1 > < 1.1 > Package Content RP-HF821 RP-HF821 unit X 1 - 6ft VGA cable X 1 - Power adapter X 1 - Power cord X 1 - Fastener screw for rear bracket x 2 < 1.2 > Structure Diagram Front view 1 Power adapter 3 2 Rear view 4 5 1 LCD panel 2 LCD membrane 3 Latch to release the display panel from the rear bracket 4 Rear mounting bracket 5 Power adapter basket DVI-D Audio Power cord Power BNC S-Video VGA HDMI out - in - in Video PC Basic I/O : DVI-D + VGA + HDMI w/ speaker AV3.
< 1.2 > Dimension Front View Side View UNIT : mm Rear View 1mm = 0.03937 inch Bottom View Model RP-HF821 Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight 501.9 x 64 x 353 mm 19.8 x 2.5 x 13.9" 555 x 124 x 537 mm 21.9 x 4.9 x 21.1" 10.3 kg 22.7 lb 12.7 kg 27.9 lb UM-CV-751-RP-HF821-Q215V1 P.2 www.austin-hughes.
< 1.3 > VESA mount Installation RP-HF821 M4 screw VESA mount ( 100*100mm ) ■ UM-CV-751-RP-HF821-Q215V1 Hardware and M4*4 pcs for VESA mount are not provided P.3 www.austin-hughes.
< 1.3 > Rear Mounting Bracket Installation Step ■ ■ 1 Mount the rear bracket with M6 screw set. 8 x M6 screw set are required. M6 screw sets are not provided. rear bracket Step ■ Insert the upper part of the RP-F821 display panel into the rear bracket. Step ■ 2 3 Push the lower part of the RP-F821 display panel into the rear bracket. Step 4 ■ Fix the RP-F821 display panel into the rear bracket with two fasteners ( Left & right side ).
< Part 2 > < 2.1 > Product Specifications LCD Panel RP-HF821 Panel Size ( diagonal ) 21.5-inch Widescreen TFT color LCD Display pixel ( dots x lines ) 1920 x 1080 Brightness ( typ. ) 1000 Contrast Ratio ( typ. ) 5000:1 Color 16.7 M Viewing Angle ( L/R/U/D ) 89/89/89/89 Response Time ( ms ) 16 Dot pitch ( mm ) 0.248 Display Area ( mm ) 476.64H x 268.11V Surface treatment Anti-glare Surface hardness 3H Backlight Type LED MTBF ( hrs ) Video Connectivity Digital HDMI HDMI 1.
Environmental Conditions Operating Storage Physical Specification Temperature 0 to 55°C degree Humidity 20~90%, non-condensing Temperature -5 to 60°C degree Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random Product ( W x D x H ) 501.9 x 64 x 353 mm 19.8 x 2.5 x 13.9 inch Packing ( W x D x H ) 555 x 124 x 537 mm 21.9 x 4.9 x 21.1 inch Applicable Format Net Weight 10.3 kgs / 22.7 lbs Gross Weight 12.7 kgs / 27.
< 2.2 > On-screen Display Operation ( OSD ) Membrane Switch RP-HF821 Function Turn the monitor on or off Display the OSD menu Act as an Enter key to select screen setting options Scroll through menu options and adjust the displayed control Exit the OSD screen Go back to the previous on-screen sub-menu or main menu Remark : All LED touch buttons in WHITE light. The LED of Power touch button will flash continuously when there is no signal input.
< 2.2 > On-screen Display Operation ( OSD ) 2 3 PC Auto adjust : Automatically adjust sizes, centers and fine tunes the video signal to eliminate waviness and distortion. Clock : Adjust the clock value Phase : Adjust the phase value H. Position : Align the screen image left or right V.
< 2.3 > How to Use Picture In Picture ( PIP ) / Picture By Picture ( PBP ) RP-HF821 < 2.3.1 > Picture in Picture ( PIP ) Mode Display the Sub screen in the Main screen.
< 2.3.2 > Picture By Picture ( PBP ) Mode Display the Sub screen next to the Main screen. OSD Menu → MISC → PIP Mode → PBP Main screen Sub screen Size LCD Monitor Main / Sub screen 1920 x 1200 955 x 716 1920 x 1080 955 x 716 1440 x 900 715 x 536 1366 x 768 678 x 508 1280 x 1024 635 x 476 < 2.3.3 > PIP / PBP Source To select an input signal for PIP / PBP Sub screen.
< Part 3 > < 3.1 > Options : 3G / HD / SD-SDI input RP-HF821 Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market. Designed for use with CyberView Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, Austin Hughes provides a SDI input module without using additional space or power and it comes standard with a 2-year warranty.
< 3.2 > Options : MCS ( Multi-display Control ) More control is always good. Especially when it is necessary and easy. Austin Hughes provides MCS solution to control the OSD of various CyberView LCD display up to 64 units. The RS-232C is used for the communication between the PC and the first display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.
< 3.3 > AV3.0 Upgrade Options : RP-HF821 ( S-Video + Composite, BNC ) - AV - Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers ) DVI-D Audio Power BNC S-Video VGA HDMI out - in - in Video PC UM-CV-751-RP-HF821-Q215V1 P.13 www.austin-hughes.
< 3.4 > Options : Touchscreen & driver HF21.5" USB Touchscreen Specification Model TRB e-Resistive TCB e-Capacitive Technology 5-Wire Resistive Capacitive Touch Point Single Single Stylus or Finger Finger ≤ 50g / Stylus=R0.8 ≤ 50g 10 million touches 300 million touches 15 ms 20 ms 80% ± 3% 87% ±2% 3H 9H Haze 8% ± 3% 7% Glass 3.2 ±0.2 mm 2.
< 3.5 > Options : DC Power Model RP-HF821 24V 48V 110 ~ 125V Input rating Input voltage: 24-Volt 48-Volt 110-Volt 18 ~ 36V 36 ~ 75V 66 ~ 160V - No load 50 mA 50 mA 40 mA - Full load 4880 mA 2442 mA 993 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 8.4A Efficiency 85% 85% 92% Input range: Input current Output rating UM-CV-751-RP-HF821-Q215V1 P.15 www.austin-hughes.
< 3.6 > Options : MIL-type or Lockable Connector Input MIL - type Connector Part no. MIL Standard DC Power *** ( Male ) MS3470W8-33P MIL - DTL - 26482 VGA *** ( Male ) MS3470W14-15P MIL - DTL - 26482 *** There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design flexibility possible. For more information, please contact us. Input Lockable Connector Part no.
