User Manual

www.austin-hughes.comUM-IPM-01-Q213V2
P. 3
< 1.2 > IP dongle installation & connection
To remote PDU over IP, users can order IP dongle :
IPD-01 IP dongle for vertical PDU
IP dongle
Customer’s network device
( router or hub )
Vertical IP dongle installation steps :
- slide the IP dongle on the plate above the meter
- plug the RJ-45 connector of IP dongle into the LINK port of the 1st level PDU meter
- use the CAT. 5 / 6 cable to connect IP dongle to network device
To LINK port
of the 1st PDU
To LAN port
CAT. 5 / 6
cable
CAT. 5 / 6
cable
Up to 20 meters Up to 20 meters
LINK OUT
RESET
ON DIP
18765432
CURRENT
(A)
225
LINK OUT
RESET
ON DIP
18765432
CURRENT
(A)
225
LINK OUT
RESET
ON DIP
18765432
CURRENT
(A)
225
Please refer dip switch setting on P.1 - 2 for different level PDUs
To LINK port
of next PDU
( Up to 16 levels )
1st level PDU 3rd level PDU2nd level PDU