Owner manual

www.austin-hughes.comUM-IGM-03-Q314V1
P.40
< 5.1 > System Setup
In < Setup > page, administrator can
- Activate max. 30 Master IP groups
- Set the group command password
- Enable / disable the EC box levels
Step 1. Activate ” Master IP group 01
Step 2. Input “ IP address ” & password of the IP dongle
Step 3.Enable “ Command password
Step 4. Input “ New command password ”. Default is “ 00000000
Step 5. Input new command password in “ Conrm new password ” again.
Step 6. Click “ Apply to nish the Master IP group setup
Step 7.Enable ” the EC box connected to the Master IP group
Step 8. Click “ Apply to nish the EC box setting
Step 9. Repeat step 1 to 9 for other Master IP groups if necessary