Instruction Manual

www.austin-hughes.comUM-ICM-02-Q215V1 P.31
< 4.1 > System setup
In < Setup > page, administrator can activate max. 30 Master IP groups & set the group command
password
Step 1. “ Activate “ Master IP group 01
Step 2. Input “ IP address “ & “ password “ of the Master IP group 01
Step 3. “ Enable “ Command password
Step 4. Input “ New command password ”. Default is “ 00000000 “
Step 5. Input new command password in “ Confi rm new password “ again.
Step 6. Click “ Apply “ to fi nish the Master IP group setup
Step 7. Repeat step 1 to 6 for other Master IP groups if necessary