Instruction Manual

www.austin-hughes.comUM-ICM-02-Q215V1 P.5
Hanging bracket installation
Cable
clip
ON / OFF
Button
Power
cord
Mounting
screws
Perforated
Cabinet Door
< 1.2 > 33U Door Mount Fan Panel
Assemble & adjust the hanging bracket with M4*6mm screw & nut, to fi t the thickness of the door.
Install the hanging bracket kit on the rear side of the fan panel with M4*10mm screw.
Hang the unit on the door.
Place attached 4 screws then through the door and tighten them.
Follow steps - on P.4 .
1
2
3
4
3 5
5
M4*10mm
screws
Hanging bracket with
M4*6mm screw & nut