User guide

www.austin-hughes.comUM-IC-Basic-33U-Q215V1 P.1
The equipment comes with the standard parts shown on the package contents. Check and make sure they are included and in good
condition. If anything is missing, or damage, contact the supplier immediately.
Unpacking
Package Content
Hanging bracket kit
Part no. : F-HBK
- Hanging bracket x 2 pcs
- M4*6mm screw with nut x 4 sets
- M4*10mm screw x 2 pcs
Optional mounting kit
* For installation, please
refer to p.4
F-33.9 Door mount Fan Panel is typically installed on the outside of a cabinet’s rear perforated door to im-
prove extraction of heat from high density cabinet.
The unit can be attached to most 42U or taller cabinets. If aisle is relatively narrow for exterior mounting, the
unit may be installed on the inside of the perforated door. For details, please refer to the model table below :
Front Door
Cool Air In
Rear Door
Hot Air Out
Model Installation Airfl ow Purpose
F-33.9A
Rear door outside Extract airfl ow Exhaust air out from cabinet
Front door inside Intake airfl ow Cool air in from aisle
F-33.9B
Front door outside Intake airfl ow Cool air in from aisle
Rear door inside Extract airfl ow Exhaust air out from cabinet
- 33U door mount fan panel x 1 pc
- 6 ft power cord x 1 pc
- User Manual x 1 pc
- Mounting screw x 6 pcs ( attached with the unit )
- Air blocking material x 1 pc