User manual

www.austin-hughes.comUM-IGM-03-Q413V3

P.66

Part VIII. SNMP

Step 5. Select SNMP from the left navigation pane

Step 6. The

SNMP Settings window appears as below:

Step 7. Click “ Enable “ in “ SNMP Agent “ to start the SNMP agent service

Step 8. Input “ Read Community “. Default is “ public ”

Step 9. Input “ Write Community “. Default is “ private ”

Step 10. Select “ disabled “ or “ V2Trap “ in “ SNMP Traps “

If select “ V2Trap “ , please input IP address of the SNMP management station in “ Station IP: “

Step 11. Click “ Apply “ to ﬁ nish the SNMP settings