User manual

www.austin-hughes.comUM-IGM-03-Q413V3

P.40

< 5.1 > System Setup

In < Setup > page, administrator can

- Activate max. 30 Master IP groups

- Set the group command password

- Enable / disable the EC box levels

Step 1. “ Activate “ Master IP group 01

Step 2. Input “ IP address “ & “ password “ of the IP dongle

Step 3. “ Enable “ Command password

Step 4. Input “ New command password ”. Default is “ 00000000 “

Step 5. Input new command password in “ Conﬁ rm new password “ again.

Step 6. Click “ Apply “ to ﬁ nish the Master IP group setup

Step 7. “ Enable “ the EC box connected to the Master IP group

Step 8. Click “ Apply “ to ﬁ nish the EC box setting

Step 9. Repeat step 1 to 9 for other Master IP groups if necessary