dedicated LCD display solutions User Manual 21.5” FHD 1920 x 1080 LCD with Digital TV AP-F21-TV Aluminum front bezel NAP-F21-TV Front NEMA4 / IP65 OP-F21-TV Universal Mounting Open Frame Designed and manufactured by Austin Hughes UM-UV-621-F21-TV-Q215V1 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part. 1 > AP-F21-TV / NAP-F21-TV 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.1 P.2 - 3 P.4 - 5 < Part. 2 > OP-F21-TV 2.1 2.2 2.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.6 P.7 - 8 P.9 < Part. 3 > Specifications / OSD 3.1 3.2 Product Specifications On-screen Display Operation ( OSD ) P.10 - 11 P.12 < Part. 4 > Digital TV - Specifications / OSD 4.1 4.2 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
< Part 1 > < 1.1 > Package Content - AP / NAP-F21-TV AP-F21 / NAP-F21-TV 21.5" FHD LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Mounting hardware X 1 pack - Mounting bracket x 4 pcs - M4* 6mm screw x 8 pcs - M4* 50mm screw x 8 pcs Basic I/O HDMI VGA Audio in ( PC ) RCA TV Audio out Firmware - An abundance of input connections that include HDMI, VGA, Composite, Audio and TV w/ Remote Controller UM-UV-621-F21-TV-Q215V1 P.1 www.austin-hughes.
< 1.2 > Structure Diagram - AP / NAP-F21-TV 21.5" FHD LCD Display 1 2 3 Front view 4 AP-F21-TV NAP-F21-TV 5 7 Rear view 1 Rear case 2 LCD panel 3 Protective 3mm glass 4 6mm aluminum front bazel 5 Audio speaker, pair 6 LCD membrane 7 Remote sensor 6 Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight AP-F21-TV NAP-F21-TV 577.8 x 59.1 x 369.3 mm 22.7 x 2.3 x 14.5 inch 659 x 117 x 640 mm 25.9 x 4.6 x 25.2 inch 9 kg 19.8 lbs 12.7 kg 27.
< 1.2 > Dimension - AP / NAP-F21-TV Front View Side View AP-F21-TV NAP-F21-TV Rear View UNIT : mm 1mm = 0.03937 inch Bottom View UM-UV-621-F21-TV-Q215V1 P.3 www.austin-hughes.
< 1.3 > Panel Mount Installation - AP / NAP-F21-TV 1 2 Mounting M4*6mm screw bracket 21.5" FHD LCD Display 3 M4*50mm screw x 8 pcs x 4 pcs x 8 pcs Hardware set part no. UV-BK#2 Steps ■ ■ UM-UV-621-F21-TV-Q215V1 Install 4 mounting brackets with 8 x M4*6mm screws Adjust the LCD panel with 8 x M4*50mm screws and fix it on the surface. P.4 www.austin-hughes.
< 1.3 > VESA mount Installation - AP / NAP-F21-TV M4 screw VESA mount ( 100*100mm ) ■ UM-UV-621-F21-TV-Q215V1 Hardware and M4*4 pcs for VESA mount are not provided P.5 www.austin-hughes.
< Part 2 > < 2.1 > Package Content - OP-F21-TV 21.5" FHD LCD Display OP-F21-TV 21.5" FHD LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Basic I/O HDMI VGA Audio in ( PC ) RCA TV Audio out Firmware - An abundance of input connections that include HDMI, VGA, Composite, Audio and TV w/ Remote Controller UM-UV-621-F21-TV-Q215V1 P.6 www.austin-hughes.
< 2.2 > Structure Diagram - OP-F21-TV 1 Front view 2 OP-F21-TV 3 6 Rear view 1 Rear case 2 LCD panel 3 Audio speaker, pair 4 4 Universal open frame mounting 5 5 LCD membrane 6 Extended remote sensor membrane cable ( 66cm from AD board to sensor end ) Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight OP-F21-TV 574.8 x 52.6 x 366.3 mm 22.6 x 2.1 x 14.4 inch 659 x 117 x 640 mm 25.9 x 4.6 x 25.2 inch 6.7 kg 14.7 lbs 10.4 kg 22.
< 2.2 > Dimension - OP-F21-TV 21.5” FHD LCD Display Front View Side View OP-F21-TV UNIT : mm Rear View 1mm = 0.03937 inch Bottom View UM-UV-621-F21-TV-Q215V1 P.8 www.austin-hughes.
< 2.3 > Installation - OP-F21-TV ( I ) Universal mount ( II ) VESA mount ( 100*100mm ) M4 screw Hardware and M4*4 pcs for VESA mounting are not provided UM-UV-621-F21-TV-Q215V1 P.9 www.austin-hughes.
< Part 3 > < 3.1 > Product Specifications Mechanical Design 21.5” FHD LCD Display AP / NAP-F21-TV OP-F21-TV Front Panel Black, RAL 9005 - Rear Casing Black, RAL 9005 Black, RAL 9005 VESA Mounting 100 x 100mm 100 x 100mm Other Mounting Panel mount Universal mount 3mm protective glass - Protection LCD Panel Manufacturer Panel Size ( diagonal ) 21.5-inch Widescreen TFT color LCD Display pixel ( dots x lines ) 1920 x 1080 Brightness ( typ. ) 250 Contrast Ratio ( typ.
Regulatory Environmental Conditions Safety FCC & CE certified Environmental RoHS2 & REACH compliant Operating Temperature 0 to 55°C degree Humidity 20~90%, non-condensing Temperature -5 to 60°C degree Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random Storage Physical Specification Product ( W x D x H ) AP / NAP-F21-TV OP-F21-TV 577.8 x 59.1 x 369.3 mm 574.8 x 52.6 x 366.3 mm 22.7 x 2.3 x 14.5 inch 22.6 x 2.1 x 14.
< 3.2 > On-screen Display Operation ( OSD ) 21.5” FHD LCD Display Power light Green = On Orange = Power saving Membrane Switch Function Power on / off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control (To auto adjustment by pressing the button for 5 seconds) Exit the OSD screen Toggle analog, digital & video connection (DVI-D and video options only) UM-UV-621-F21-TV-Q215V1 P.12 www.austin-hughes.
< Part 4 > Digital TV - ATSC < 4.1 > Remote Controller 1 11 2 1 12 1 13 1 14 1 15 3 1 16 4 1 17 5 1 18 6 1 19 7 8 9 10 2 20 21 2 29 22 30 23 24 25 27 31 32 33 34 28 35 26 UM-UV-621-F21-TV-Q215V1 P.13 www.austin-hughes.
21.5” FHD LCD Display MUTE 0-9 -/-- Mute or restore sound 4 RED / GREEN / YELLOW / CYAN COLOR keys.
< 4.2 > On-screen Display Operation ( OSD ) Press MENU key to display menu or close the current menu and open the previous menu. And press LEFT / RIGHT to select sub menu. Press ENTER key to sub menu. < 4.2.1 > Channel Menu The Channel menu is available only in ATV and DTV source, followed by the CHANNEL MENU, Air/Cable, Auto Scan, Favorite, Show / Hide and DTV Signal are the items, which can be selected by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items.
.5” FHD LCD Display < 4.2.1.1 > Auto Scan Menu Press ENTER key to enter the submenu, press LEFT / RIGHT keys to select yes or no. If you choose yes, then you can start the automatic tuning process. Press MENU key to stop the process. After a few minutes the tuning will finish and the first station stored will show on the TV screen. Change channels by pressing UP / DOWN keys. < 4.2.1.2 > Favorite Menu ■ Press UP / DOWN keys to choose the channel which you want to select.
< 4.2.2 > Picture Menu Enter Picture Menu, you can select Picture Mode, Color Mode, Zoom Mode, 3DNR, Backlight, DLC and Color Range items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■ Press ENTER key to change the selection or enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.2.1 > Picture Mode Menu ■ Press LEFT / RIGHT keys to select the picture mode. If [User] is selected, adjust the items below.
21.5” FHD LCD Display < 4.2.2.2 > Color Mode Menu ■ Press LEFT / RIGHT keys to select the picture mode. If [User] is selected, adjust the items below. ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.2.3 > Zoom Mode Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu.
< 4.2.2.4 > Backlight Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.2.5 > 3DNR Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-UV-621-F21-TV-Q215V1 P.19 www.austin-hughes.
21.5” FHD LCD Display < 4.2.2.6 > Advanced Menu ■ Press ENTER key to enter the Advanced menu if you are in VGA source. ■ Press ▲/▼ keys to select different setting. ■ Use ◄/► keys to adjust the horizontal position of the window. ■ Use ◄/► keys to adjust the vertical position of the window. ■ Use ◄/► keys to adjust the clock of the window. ■ Use ◄/► keys to adjust the phase of the window. ■ Press ENTER key for a moment to restore the window. ■ Press MENU key to return the previous menu.
< 4.2.3 > Audio Menu Enter Audio menu, you can select Equalizer Standard, MTS, Audio Language, SPDIF Type, Surround Sound, Audio Only and AVC items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■ Press ENTER key to change the selection or enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.3.1 > Equalizer Menu ■ Press LEFT / RIGHT keys to select the picture mode. If [User] is selected, adjust the items below.
21.5” FHD LCD Display < 4.2.3.2 > MTS Menu ( only in ATV ) ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.3.3 > Audio Language Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-UV-621-F21-TV-Q215V1 P.22 www.austin-hughes.
< 4.2.4 > Timer Menu Enter Time menu, you can select Sleep Timer, Time Zone, DST, Time Format, Auto Sync, Clock, Wake Up, 3D Type 2D, 3D Detect and 3D_LR items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■ Press ENTER key to change the selection or enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.4.1 > Sleep Timer Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set.
21.5” FHD LCD Display < 4.2.4.2 > Time Zone Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.4.3 > Clock Menu ( only when Auto Sync is off ) ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-UV-621-F21-TV-Q215V1 P.24 www.austin-hughes.
< 4.2.4.4 > Wake Up Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.4.5 > 3D Type Menu ( for 3D panel ) ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-UV-621-F21-TV-Q215V1 P.25 www.austin-hughes.
21.5” FHD LCD Display < 4.2.5 > Setup Menu Enter Setup menu, you can select Menu Language, Transparent, OSD Time Out, Closed Caption, Restore Default, Setup Wizard, Software Update (USB) and CEC items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■ Press ENTER key to change the selection or enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.5.
< 4.2.5.2 > Transparent Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.5.3 > OSD Time Out Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-UV-621-F21-TV-Q215V1 P.27 www.austin-hughes.
21.5” FHD LCD Display < 4.2.5.4 > Closed Caption Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press ENTER key to enter the sub-menu. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.5.4.1 > Option Menu ■ Press LEFT / RIGHT keys to select the option mode. If [User] is selected, adjust the items below. ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value.
< 4.2.5.5 > Restore Default Menu ■ Press ENTER key to enter the restore menu. ■ Press LEFT / RIGHT keys to select yes or no. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.5.6 > Setup Wizard Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press ENTER key to go to next step. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-UV-621-F21-TV-Q215V1 P.29 www.
21.5” FHD LCD Display < 4.2.5.7 > Software Update ( USB ) Menu ■ Press ENTER key to enter the restore menu. ■ Press LEFT / RIGHT keys to select yes or no. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.5.8 > CEC Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press ENTER key to enter the sub-menu or set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu.
< 4.2.6 > Lock Menu Followed by the Lock Menu, Enter Password, Change Password, System Lock, Input Block, US, Canada, RRT Setting and Reset RRT are the items, which can be selected by pressing UP / DOWN keys. RRT Setting and Reset RRT are only available in DTV when the program has RRT. And the RRT Setting menu is change with the DTV program. You should Reset RRT before you operate the RRT Setting menu. The operation is same with the US menu etc. ■ Press the Numeric keys to enter password.
21.5” FHD LCD Display < 4.2.6.1 > Change Password Menu ■ To change password, you need to enter the old password. After enter old password, you can enter the new password and confirm password, which consists of only digits. The new password and Confirm password must be same. If the new password and confirm password are different, unmatched is displayed to indicate that new password is invalid. ■ Press VOL- key to clear and press VOL+ key to cancel the menu. ■ Press MENU key to return the previous menu.
< 4.2.6.3.1 > TV Rating Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.6.3.2 > MPAA Menu ■ Press UP / DOWN and LEFT / RIGHT keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.6.4 > Canada Menu ■ Press UP / DOWN keys to select different setting.
21.5” FHD LCD Display < 4.2.6.4.1 > Canada EngMenu ■ Press UP / DOWN and LEFT / RIGHT keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.6.4.2 > Canada Fre Menu ■ Press UP / DOWN and LEFT / RIGHT keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. UM-UV-621-F21-TV-Q215V1 P.34 www.
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved. UM-UV-621-F21-TV-Q215V1 www.austin-hughes.
