dedicated LCD display solutions User Manual 17” LCD AP-17 Aluminum front bezel NAP-17 Front NEMA4 / IP65 OP-17 Universal Mounting Open Frame Designed and manufactured by Austin Hughes UM-UV-621-17-Q215V1 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part. 1 > AP-17 / NAP-17 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.1 P.2 - 3 P.4 - 5 < Part. 2 > OP-17 2.1 2.2 2.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.6 P.7 - 8 P.9 < Part. 3 > Specifications / OSD 3.1 3.2 Product Specifications On-screen Display Operation ( OSD ) P.10 - 11 P.12 < Part. 4 > Options 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 Option Table MCS Multi-display control solution AV2.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
< Part 1 > < 1.1 > Package Content - AP / NAP-17 17" LCD Display AP-17 / NAP-17 17" LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Mounting hardware X 1 pack - Mounting bracket x 4 pcs - M4* 6mm screw x 8 pcs - M4* 50mm screw x 8 pcs Basic I/O Power DVI-D VGA DVI-D VGA AV2.2D upgrade I/O Power BNC S-Video Audio out - in - in Video PC AV2.2H upgrade I/O Power BNC S-Video Audio out - in - in Video PC UM-UV-621-17-Q215V1 VGA HDMI P.1 www.austin-hughes.
< 1.2 > Structure Diagram - AP / NAP-17 1 2 3 Front view 4 AP-17 NAP-17 5 7 Rear view 1 Rear case 2 LCD panel 3 Protective 3mm glass 4 6mm aluminum front bazel 5 Audio speaker ( for HDMI, Audio or TV option ) 6 LCD membrane 7 Remote sensor 6 Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight AP-17 NAP-17 439 x 64.2 x 356.6 mm 17.3 x 2.5 x 14 inch 615 x 113 x 523 mm 24.2 x 4.4 x 20.6 inch 6.6 kg 14.5 lbs 9.2 kg 20.
< 1.2 > Dimension - AP / NAP-17 17” LCD Display Front View Side View AP-17 NAP-17 Rear View UNIT : mm 1mm = 0.03937 inch Bottom View UM-UV-621-17-Q215V1 P.3 www.austin-hughes.
< 1.3 > Panel Mount Installation - AP / NAP-17 1 2 Mounting M4*6mm screw bracket 3 M4*50mm screw x 8 pcs x 4 pcs x 8 pcs Hardware set part no. UV-BK#2 Steps ■ ■ UM-UV-621-17-Q215V1 Install 4 mounting brackets with 8 x M4*6mm screws Adjust the LCD panel with 8 x M4*50mm screws and fix it on the surface. P.4 www.austin-hughes.
< 1.3 > VESA mount Installation - AP / NAP-17 17” LCD Display M4 screw VESA mount ( 100*100mm ) ■ UM-UV-621-17-Q215V1 Hardware and M4*4 pcs for VESA mount are not provided P.5 www.austin-hughes.
< Part 2 > < 2.1 > Package Content - OP-17 OP-17 17" LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Basic I/O Power DVI-D VGA DVI-D VGA AV2.2D upgrade I/O Power BNC S-Video Audio out - in - in Video PC AV2.2H upgrade I/O Power BNC S-Video Audio out - in - in Video PC UM-UV-621-17-Q215V1 VGA HDMI P.6 www.austin-hughes.
< 2.2 > Structure Diagram - OP-17 17" LCD Display 1 Front view 2 OP-17 3 6 Rear view 1 Rear case 2 LCD panel 3 Audio speaker ( for HDMI, Audio or TV option ) 4 Universal open frame mounting 5 LCD membrane 6 Extended remote sensor membrane cable 4 5 ( 66cm from AD board to sensor end ) Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight OP-17 436 x 58.2 x 353.6 mm 17.2 x 2.3 x 13.9 inch 615 x 113 x 523 mm 24.2 x 4.4 x 20.6 inch 4.9 kg 10.
< 2.2 > Dimension - OP-17 Front View Side View OP-17 UNIT : mm Rear View 1mm = 0.03937 inch Bottom View UM-UV-621-17-Q215V1 P.8 www.austin-hughes.
17” LCD Display < 2.3 > Installation - OP-17 ( I ) Universal mount ( II ) VESA mount ( 100*100mm ) M4 screw Hardware and M4*4 pcs for VESA mounting are not provided UM-UV-621-17-Q215V1 P.9 www.austin-hughes.
< Part 3 > < 3.1 > Product Specifications Mechanical Design AP / NAP-17 OP-17 Front Panel Black, RAL 9005 - Rear Casing Black, RAL 9005 Black, RAL 9005 VESA Mounting 100 x 100mm 100 x 100mm Other Mounting Panel mount Universal mount 3mm protective glass - Protection LCD Panel Manufacturer Panel Size ( diagonal ) 17-inch TFT color LCD Display pixel ( dots x lines ) 1280 x 1024 Brightness ( typ. ) 250 Contrast Ratio ( typ. ) 1000:1 Color 16.
17” LCD Display Physical Specification AP / NAP-17 OP-17 439 x 64.2 x 356.6 mm 436 x 58.2 x 353.6 mm 17.3 x 2.5 x 14 inch 17.2 x 2.3 x 13.9 inch 615 x 113 x 523 mm 615 x 113 x 523 mm 24.2 x 4.4 x 20.6 inch 24.2 x 4.4 x 20.6 inch Net Weight 6.6 kgs / 14.5 lbs 4.9 kgs / 10.8 lbs Gross Weight 9.2 kgs / 20.2 lbs 7.5 kgs / 16.
< 3.
< Part 4 > Options 17” LCD Display < 4.1 > Option Table Options AP / NAP OP HDMI * or DVI-D S-Video * + Composite ( BNC ) Audio Touchscreen MCS multi-display control DC Power MIL-type / lockable connector Quad display TV ( Analog ) * * About HDMI and DVI-D ( 1 ) For AV2.2 upgrade, either HDMI or DVI-D is provided. * Remote Controller ( 1 ) AV2.2 upgrade comes with RC-1 remote controller. ( 2 ) TV option comes with RC-2 remote controller. UM-UV-621-17-Q215V1 P.13 www.austin-hughes.
< 4.2 > Options : MCS ( Multi-display Control ) More control is always good. Especially when it is necessary and easy. Austin Hughes provides MCS solution to control the OSD of various UltraView LCD display up to 64 units. The RS-232C is used for the communication between the PC and the first display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.
17” LCD Display < 4.3 > Options : AV2.2D Upgrade Options - DVI-D ( DVI-D TMDS single link ) ( S-Video + Composite, BNC ) - AV - Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers ) Power BNC S-Video Audio DVI-D VGA out - in - in Video PC AV2.2H Upgrade Options - HDMI ( HDMI 1.1, CEA-861-D ) ( S-Video + Composite, BNC ) - AV - Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers ) Power BNC S-Video Audio out - in - in Video PC VGA HDMI *** AV2.
How to Use RC-1 Remote Controller 5 1 2 3 6 7 4 8 9 1 POWER Switches on or off the TV 2 MUTE Turn on or off the speaker 3 INPUT Switch to signal input mode 4 0- 9 Select channels. For channel numbers 10 and above, enter the second digit within two seconds.
17” LCD Display < 4.4 > Options : Touchscreen & driver 17" USB Touchscreen Specification Model TPC-17 Multi-touch TRB e-Resistive TCB e-Capacitive Technology Projected Capacitive 5-Wire Resistive Capacitive Touch Point 4 Single Single Input Type Finger or Capacitive Stylus Finger or Stylus Finger Resolution 2048 x 2048 2048 x 2048 2048 x 2048 ± 10 mm offset - - Response Speed Max.
< 4.4 > Options : Touchscreen & driver TPC-17 Driver Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports easy Plug-and-Play operations. There is no need to install additional drivers on the computer. TRB / TCB Driver Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc or download the driver from the link below : http://www.austin-hughes.com/downloads/UVDL/driver.html Step 2. Double click the Setup.exe Step 3.
< 4.6 > Options : MIL-type or Lockable Connector Input MIL - type Connector Part no. 17” LCD Display MIL Standard DC Power *** ( Male ) MS3470W8-33P MIL - DTL - 26482 VGA *** ( Male ) MS3470W14-15P MIL - DTL - 26482 *** There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design flexibility possible. For more information, please contact us. Input Lockable Connector Part no.
< 4.7 > Options : Quad Display QD Specification Item Model Number Description QD (NTSC) QD (PAL) Number of Color 16.7 M 16.7 M Imaging System NTSC PAL 1024 x 525 1024 x 625 60 50 Resolution Refresh Rate Video Input Video Output Camera Input 1.0 Vpp, 75 Ohm x 4 VCR Input 1.0 Vpp, 75 Ohm x 1 Live Monitor 1.0 Vpp, 75 Ohm x 1 Loop Through Out 1.0 Vpp, 75 Ohm x 4 VCR Output 1.
17” LCD Display < 4.8 > Options : TV ( Analog ) TV Power BNC S-Video Audio out - in - in Video PC *** VGA HDMI For TV option : ( 1 ) The AD board comes standard with HDMI, VGA, S-Video, BNC, audio inputs and RC-2 remote controller. ( 2 ) Casing dimensions will be changed. P.
How to Use RC-2 Remote Controller 1 8 2 INPUT 3 4 MUTE 1 2 3 4 5 6 7 8 9 AUTO 0 -/-- VOL 9 CH 10 FREEZE 11 1 12 MENU 5 SELECT 13 ASPECT 14 6 SLEEP ENTER 15 16 7 BACK 20 SOURCE SWAP EXIT PIP POSITION PIP AUDIO 17 1 18 PIP 21 19 Water proof 1 INPUT 2 Switches on or off the TV 3 0-9 4 AUTO MENU 5 6 ▲ / ▼ / ◄ / ► / ENTER 7 BACK MUTE Vol + / CH + / FREEZE - / -ASPECT SELECT SLEEP EXIT 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Select the source PIP fu
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved. UM-UV-621-17-Q215V1 www.austin-hughes.
