dedicated LCD display solutions User Manual 17” High Resolution 1920 x 1200 LCD AP-X17 Aluminum front bezel NAP-X17 Front NEMA4 / IP65 OP-X17 Universal Mounting Open Frame Designed and manufactured by Austin Hughes UM-UV-621-X17-Q215V1 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part. 1 > AP-X17 / NAP-X17 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.1 P.2 - 3 P.4 - 5 < Part. 2 > OP-X17 2.1 2.2 2.3 Package Content Structure Diagram & Dimension Mounting Hardware & Installation P.6 P.7 - 8 P.9 < Part. 3 > Specifications / OSD / Remote Controller 3.1 3.2 3.3 3.4 Product Specifications On-screen Display Operation ( OSD ) Picture In Picture ( PIP ) / Picture By Picture ( PBP ) Remote Controller ( RC-2 ) P.10 - 11 P.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
< Part 1 > < 1.
< 1.2 > Structure Diagram - AP / NAP-X17 1 2 Front view 3 AP-X17 NAP-X17 4 6 1 Rear case 2 LCD panel 3 6mm aluminum front bazel 4 Audio speaker, pair 5 LCD membrane 6 Remote sensor Rear view 5 Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight AP-X17 NAP-X17 468.5 x 57.1 x 331 mm 18.4 x 2.2 x 13 inch 615 x 113 x 523 mm 24.2 x 4.4 x 20.6 inch 4.9 kg 10.8 lbs 7.7 kg 16.9 lbs UM-UV-621-X17-Q215V1 P.2 www.austin-hughes.
< 1.2 > Dimension - AP / NAP-X17 17” High Resolution LCD Display Front View Side View AP-X17 NAP-X17 Rear View UNIT : mm 1mm = 0.03937 inch Bottom View UM-UV-621-X17-Q215V1 P.3 www.austin-hughes.
< 1.3 > Panel Mount Installation - AP / NAP-X17 1 2 Mounting M4*6mm screw bracket 3 M4*50mm screw x 8 pcs x 4 pcs x 8 pcs Hardware set part no. UV-BK#2 Steps ■ ■ UM-UV-621-X17-Q215V1 Install 4 mounting brackets with 8 x M4*6mm screws Adjust the LCD panel with 8 x M4*50mm screws and fix it on the surface. P.4 www.austin-hughes.
< 1.3 > VESA mount Installation - AP / NAP-X17 17” High Resolution LCD Display M4 screw VESA mount ( 100*100mm ) ■ UM-UV-621-X17-Q215V1 Hardware and M4*4 pcs for VESA mount are not provided P.5 www.austin-hughes.
< Part 2 > < 2.1 > Package Content - OP-X17 OP-X17 17” High Resolution LCD display X 1 6ft VGA cable X 1 Power cord X 1 Remote controller X 1 Basic I/O Power BNC S-Video Audio out - in - in Video PC DVI-D VGA HDMI - An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio - On-chip Faroudja® DCDi Cinema processing UM-UV-621-X17-Q215V1 P.6 www.austin-hughes.
< 2.2 > Structure Diagram - OP-X17 17” High Resolution LCD Display Front view 1 2 OP-X17 3 6 1 Rear case 2 LCD panel 3 Audio speaker, pair 4 4 Universal open frame mounting 5 5 LCD membrane 6 Extended remote sensor membrane cable Rear view ( 66cm from AD board to sensor end ) Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight OP-X17 465.5 x 50.6 x 328 mm 18.3 x 2 x 12.9 inch 615 x 113 x 523 mm 24.2 x 4.4 x 20.6 inch 3.8 kg 8.4 lbs 6.
< 2.2 > Dimension - OP-X17 Front View Side View OP-X17 UNIT : mm Rear View 1mm = 0.03937 inch Bottom View UM-UV-621-X17-Q215V1 P.8 www.austin-hughes.
< 2.3 > Installation - OP-X17 17” High Resolution LCD Display ( I ) Universal mount ( II ) VESA mount ( 100*100mm ) M4 screw Hardware and M4*4 pcs for VESA mounting are not provided UM-UV-621-X17-Q215V1 P.9 www.austin-hughes.
< Part 3 > < 3.1 > Product Specifications Mechanical Design AP / NAP-X17 OP-X17 Front Panel Black, RAL 9005 - Rear Casing Black, RAL 9005 Black, RAL 9005 VESA Mounting 100 x 100mm 100 x 100mm Other Mounting Panel mount Universal mount 3mm protective glass - Protection LCD Panel Panel Size ( diagonal ) 17.1-inch Widescreen TFT color LCD Display pixel ( dots x lines ) 1920 x 1200 Brightness ( typ. ) 210 Contrast Ratio ( typ. ) 600:1 Color 16.
17” High Resolution LCD Display Regulatory Environmental Conditions Safety FCC & CE certified Environmental RoHS2 & REACH compliant Operating Temperature 0 to 55°C degree Humidity 20~90%, non-condensing Temperature -5 to 60°C degree Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random Storage Physical Specification AP / NAP-X17 OP-X17 468.5 x 57.1 x 331 mm 465.5 x 50.6 x 328 mm 18.4 x 2.2 x 13 inch 18.3 x 2 x 12.
< 3.
< 3.
< 3.3 > How to Use Picture In Picture ( PIP ) / Picture By Picture ( PBP ) < 3.3.1 > Picture in Picture ( PIP ) Mode Display the Sub screen in the Main screen.
17” High Resolution LCD Display < 3.3.2 > Picture By Picture ( PBP ) Mode Display the Sub screen next to the Main screen. OSD Menu → MISC → PIP Mode → PBP Main screen Sub screen Size LCD Monitor Main / Sub screen 1920 x 1200 955 x 716 1920 x 1080 955 x 716 1440 x 900 715 x 536 1366 x 768 678 x 508 1280 x 1024 635 x 476 < 3.3.3 > PIP / PBP Source To select an input signal for PIP / PBP Sub screen.
< 3.4 > Remote Controller ( RC-2 ) 1 8 2 INPUT 3 4 MUTE 1 2 3 4 5 6 7 8 9 AUTO 0 -/-- VOL 9 CH 10 FREEZE 11 1 12 MENU 5 SELECT 13 ASPECT 14 6 SLEEP ENTER 15 16 7 BACK 20 SOURCE SWAP EXIT PIP POSITION PIP AUDIO 17 1 18 PIP 21 19 Water proof 1 INPUT 2 Select the source Switches on or off the TV 3 0-9 Only use in TV mode. Select channels. For channel numbers 10 and above, enter the second digit within two seconds.
< Part 4 > Options 17” High Resolution LCD Display < 4.1 > Option Table Options AP / NAP OP SDI *** Touchscreen MCS multi-display control *** DC Power MIL-type / lockable connector TV ( Analog ) UM-UV-621-X17-Q215V1 P.17 www.austin-hughes.
< 4.2 > Options : 3G / HD / SD-SDI input Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market. Designed for use with UltraView Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, Austin Hughes provides a SDI input module without using additional space or power and it comes standard with a 2-year warranty.
< 4.3 > Options : MCS 17” High Resolution LCD Display More control is always good. Especially when it is necessary and easy. Austin Hughes provides MCS solution to control the OSD of various UltraView LCD display up to 64 units. MCS ( Multi-display Control ) The RS-232C is used for the communication between the PC and the first display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.
< 4.
< 4.4 > Options : Touchscreen & driver 17” High Resolution LCD Display TRB / TCB Driver Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc or download the driver from the link below : http://www.austin-hughes.com/downloads/UVDL/driver.html Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4.
< 4.6 > Options : MIL-type or Lockable Connector Input MIL - type Connector Part no. MIL Standard DC Power *** ( Male ) MS3470W8-33P MIL - DTL - 26482 VGA *** ( Male ) MS3470W14-15P MIL - DTL - 26482 *** There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design flexibility possible. For more information, please contact us. Input Lockable Connector Part no.
< 4.7 > Options : TV ( Analog ) 17” High Resolution LCD Display TV Power BNC S-Video Audio out - in - in Video PC *** VGA HDMI For TV option : ( 1 ) The AD board comes standard with HDMI, VGA, S-Video, BNC, audio inputs and RC-2 remote controller. ( 2 ) For RC-2 remote controller specifications, please refer to P.16 ( 2 ) Casing dimensions will be changed. UM-UV-621-X17-Q215V1 P.23 www.austin-hughes.
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved. UM-UV-621-X17-Q215V1 www.austin-hughes.
