User Manual 1U LCD Keyboard Drawer 15", 17", 19" screen size Models RKP115 / 117 / 119 Series - With KVM options Models RKP1415 / 1417 / 1419 Series - Short depth version - Without KVM options
Contents Chapter 1 Getting Started 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 Important Safeguards..........................................................1 Regulatory Notice................................................................2 Package Contents...............................................................3 Before Installation...............................................................4 Unpacking...........................................................................
Chapter 1 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover ■ ■ Any product, on which the serial number has been defaced, modified or removed.
Chapter 1 1.2 Regulatory Notice Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions ■ ■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Chapter 1 1.
Chapter 1 1.4 Before Installation ■ ■ ■ ■ It is very important to locate the LCD Keyboard Drawer in a suitable environment. The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into a suitable cabinet. Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Position LCD Keyboard Drawer with respect to related facilities. 1.
Chapter 1 1.7 Peripheral Products Item DB-15 KVM Cat5 KVM KVM Extender Model No.
Chapter 1 1.9 Installation ■ ■ Install each rear L-bracket using two fasteners shown in Figure 1. Leaving the fasteners slightly loose. Figure 1. Installing the rear L-bracket to the LCD keyboard drawer. ■ ■ Measure the front and rear mounting depth of the rack. Align each rear L-bracket to a suitable length and tighten the fasteners shown in Figure 2. Figure 2. Aligning the rear L-brackets to a suitable length for the rack. ■ Fixed the the LCD keyboard drawer into the rack.
1.10 Connect to Server via USB Interface Chapter 1 Figure 4. Example of connecting CB-6 2-in-1 USB KVM cable to server via USB interface 1.11 Connect to KVM via USB Interface Figure 5. Example of connecting CB-6 2-in-1 USB KVM cable to KVM via USB interface Remarks : ■ RKP1415 / 1417 / 1419 series are external power versions. ■ The above connection is only for the LCD keyboard without KVM switch built-in.
1.12 Connect to Server via PS/2 Interface Chapter 1 Figure 6. Example of connecting CD-6 3-in-1 PS/2 KVM cable to server via PS/2 interface 1.13 Connect to KVM via PS/2 Interface Figure 7. Example of connecting CD-6 3-in-1 PS/2 KVM cable to KVM via PS/2 interface Remarks : ■ RKP1415 / 1417 / 1419 series are external power versions. ■ The above connection is only for the LCD keyboard without KVM switch built-in.
Chapter 2 2.1 On-screen Display Operation 15" LCD membrane 17" & 19” LCD membrane B 8 81 Re set 7 6 5 4 3 2 1 Membrane Switch Function Power light Green = On Orange = Power saving Power on / off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control Exit the OSD screen Shortcut key to auto adjustment by pressing the button for 5 seconds or Toggle analog, digital & video connection (DVI-D and video options only) P.
Chapter 2 2.2 On-screen Menu MAIN MENU BRIGHTNESS/CONTRAST AUTO ADJUST PHASE/CLOCK H/V POSITION MISC RESET BRIGHTNESS / CONTRAST Brighthtness: Adjust background black level of the screen image. Contrast: Adjust the difference between the image background (black level) and the foreground (white level). AUTO ADJUST Auto Adjust: Fine tunes the video signal to eliminate waviness and distortion. A "Adjusting" message is displayed during the process. Auto Tune: Optimize phase, clock, position and size.
Chapter 3 3.1 Specifications Item Description 1U rack mounting on slide-out rails Form Factor LCD Manufacturer 15" TFT 17" TFT 19" TFT 1024 x 768 1280 x 1024 1280 x 1024 Brightness (cd/m²) Min. 250 300 300 Color Support 16.2 Mil. 16.2 Mil. 16.7 Mil. Contrast Ratio (typ.) 450:1 700:1 1000:1 Viewing Angle (H/V) 130˚ x 100˚ 150˚ x 135˚ 150˚ x 135˚ 304 x 228 337 x 270 376 x 301 3 2 1.3 Diagonal Size Max. Resolution Display Area (mm) Tr Response Time (ms) Analog RGB, 0.
Chapter 3 3.2 Keyboard & Mouse Supporting layouts e Ne b Notebook type keyboard with touch-pad mouse Nb N keyboard integrated with touchpad Notebook type keyboard with trackball N keyboard integrated with trackball Supporting layouts c Cherry keyboard with trackball P.
Chapter 4 4.1 KVM Options Our KVM is designed to seamlessly integrate into the rear of our full range of LCD drawer solutions: ■ ■ ■ ■ For KVM operation, please refer to "Integrated LCD KVM Switch" user manual Option with high desnsity Cat5 KVM with either 16 or 32 ports Option with cost efficient DB-15 KVM integration with either 8 or 16 ports Please ask your supplier for full KVM details 4.
Chapter 4 4.4 S-Video + BNC Input Option Internal power version S-Video External power version Remarks : ■ Package includes an extra 6ft S-Video cable P.
4.5 On-screen Menu for DVI, BNC, S-Video & RCA Input 1. 2. 3.
Chapter 4 4.6 DC Power Options Model 12V 24V 48V Input rating Input voltage: 12-Volt 24-Volt 48-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No load 50 mA 50mA 50 mA - Full load 4950 mA 2450 mA 1220 mA Output voltage: 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.16A Efficiency 84% 85% 85% Input current Output rating Remarks : ■ Package does not include power cord and AC power adapter 4.
Chapter 5 5.1 Troubleshooting 1. How do I adjust the resolution? To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are determined by the display card in your computer. 2. Is interference signal appeared on LCD normal when shutting down the computer ? In rare cases, interference may appear on the monitor.
Chapter 6 6.1 Dimensions Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight RKP115 series 442 x 600 x 44 mm 17.4 x 23.6 x 1.73" 581 x 755 x 172 mm 22.9 x 29.7 x 6.8" 15 kg 33 lb 21 kg 46 lb RKP117 series 442 x 600 x 44 mm 17.4 x 23.6 x 1.73" 581 x 755 x 172 mm 22.9 x 29.7 x 6.8" 16 kg 35 lb 22 kg 48 lb RKP119 series 442 x 650 x 44 mm 17.4 x 25.6 x 1.73" 589 x 826 x 168 mm 23.2 x 32.5 x 6.6" 17 kg 37 lb 23 kg 51 lb RKP1415 series 442 x 440 x 44 mm 17.
