User manual

------------------------------------------------------------------------------------------------------------------
Commands Key Sequence by Keyboard Style
Enhanced PC
------------------------------------------------------------------------------------------------------------------
Toggle CAPS LOCK on/off CAPS LOCK
Toggle NUM LOCK on/off NUM LOCK
Put terminal in SETUP mode ALT ESC
Partially reset terminal, including communication ALT PAUSE
unlock keyboard, turn off all print modes.
Send break*
1
BREAK*
2
Toggle between block and full-duplex modes SHIFT BREAK
Print Screen formatted PRINT SCREEN
Turn auxiliary print mode on/off SHIFT SYS REQ*
3
Turn monitor mode on/off CTRL SHIFT 1 (kpd)
Turn status line display on/off CTRL
Speed scrolling rate CTRL SHIFT
Slow scrolling rate CTRL SHIFT
Home cursor and clear page CTRL SHIFT HOME
Display page 0 CTRL 0kpd
Display page 1 CTRL 1kpd
Display next page (or active other window)*
4
PAGE DOWN
Display previous page (or active other window)*
5
PAGE UP
Toggle between split screen*5 and full screen format CTRL SHIFT -kpd
Toggle Session 0*
6
ALT F1
Toggle Session 1*
6
ALT F2
Toggle Session 2*
6
ALT F3
Toggle Session 3*
6
ALT F4
Toggle Session 4*
6
ALT F5
Toggle Session 5*
6
ALT F6
Toggle Session 6*
6
ALT F7
Toggle Session 7*
6
ALT F8
Toggle Session 8*
6
ALT F9
Toggle Session 9*
6
ALT F10
Toggle Session A*
6
ALT F11
Toggle Session B*
6
ALT F12
Close the active Session by Local Terminal*
6
CTRL SHIFT . kpd
--------------------------------------------------------------------------------------------------------------------
*1. To MODEM port only when confi gured as data port: has no effect on AUX port.
*2. [BREAK] = [PAUSE] pressed together with [CTRL].
*3. [SYS REQ] = [PRINT SCREEN] pressed together with [CTRL].
*4. If screen is split.
*5. Splits screen at line 12.
*6. Only active at Ethernet mode on.
2.5 Local Keyboard Commands in Native Mode Chapter 2
P. 24