User manual

2.2 Membrane Chapter 2

Power ON

■

Turn off all devices / servers and Cat5 IP serial console

■ Make sure all cables / connectors are properly connected

16 ports

Port activity Status LEDs Reset button

Power Red: Power on indication

Link Orange: 10BaseT Etherent connection

Green: 100BaseT Ethernet connection

Ready Green: Blinking per second when system is busy

Port LED Green: Trafﬁ c activity

Reset button Press reset button to reboot the unit

P. 12

Front Panel - Port LED Indications

Warning :

Press “Shift+Esc” sets default, it will change the pre-set operating parameters and local access “Per-

sonality”, Please refer to FAQ (page 29-30) for detailed setting.