User manual

P. 8
1.10 How to Install "One Man" Installation Slides Chapter 1
Install into rack
1
■ Attach the mounting bracket to vertical mounting rails.
■ Adjust the rear mouting bracket to fi t your rack.
■ Repeat the above steps for the other side.
Caution : Leaving the screws slightly loose (Not
release).
2
■ Pick up the chassis.
■ Insert inner members of slides into the already mounted
internal slide members in the rack.
■ Pull the black arrow button on each slide that is installed
on the LCD keyboard drawer to unlock (Push at the
same time).