User manual

6.1.1 User Administration
At startup of the AP, the system will prompt user to enter the password to access to the system. The administrator
can add or remove a user easily via the web pages.
There are two levels of access privileges:
User Name Default Password Access Privileges
root root full access
(user define) (user define) only can access to Serial Port and System Status & log
6.1.2 Add User
To add a user,
■ Check the users at the User administration screen
■ Click the button Add
Figure below shows the Add User screen.
You will see the new user is on the user list now.
6.1 System Administration Chapter 6
P.26
Note :
■ The first character of User name must be alphabet.
■ The password should be at least 3 characters long.
■ The user name or password must not longer than 32 characters.
■ Only root user can access to Network and System administration.