Owner manual

STEP 7-(C0NTiNUED) GRILL BODY/CART ASSEMBLY- BONZA IVIODELS

•Lay Grill Body on its back side with control panel up. Place Grill Body between legs and Side Tables

with Hose and Regulator on Wheel Leg end. Do not lav GriM Body on, or step on Hose and

Regulator.

•Align slotted holes on sides of Grill Body with holes through edges of legs (Fig F). Hold Spacers

between Leg and Body (Needle Nose Pliers may help) and insert Body Bolts through Leg, Spacers,

and slotted holes in Grill Body. Secure using Wing Nuts, but only partially tighten. Repeat assembly

for remaining three Cart Legs.

•Using a second person, turn

full grill assembly upright with

wheels and iegs/casters on

the ground. Grill Body

should slide down and seat

itself within the slotted holes,

if not, loosen the Body Bolts

and push Body down at the

corners. Tighten all Body

Bolts and Wing Nuts and

then tighten all other Bolts.

•Adjust the Lock Lever up or

down on each Caster to lock

or unlock as desired. (NOTE:

Deluxe models do not use

casters.)

CONTINUE ASSEMBLY OF

BONZA & BONZA DELUXE

MODELS AT STEP 8.

CONTROL PANEL UP

GRILL BODY LYING

ON BACK SIDE