Tourer Black Installation Manual

1300 663 868 | [e-mail] | aussietraveller.com.au
BRISBANE SHOWROOM: 11-15 Oasis Court, Clontarf QLD 4019 | MELBOURNE SHOWROOM: 235 Barry Road, Campbellfield VIC 3061
Drill a 3/8” hole 20mm in from the edge of the
fabric and 20mm down from the under-side of
the fabric on both ends of the roller tube.
Wall bracket position
FOR POP TOP CARAVANS ONLY
20mm down
20mm in.
20mm down from
underside of fabric.
15mm from edge of fabric to
centre of bracket.
If you intend to set up the awning and walls at the same time:
1. When erecting the awning over extend the roller so the pull strap sail track is positioned at the 6 o’clock position
(at the bottom) before attempting to fit the AFK’s.
2. Slide the long side wall into pull strap sail track of the roller and then rotate the roller back to the 9 o’clock (left
end) or 3 o’clock (right end) position. (Refer to awning user/operating instructions).
3. Continue normal process of attaching the AFK’s as per the instructions above.
HELPFUL HINTS