White Medium Anti Flap Kit (AFK), 2200-2300mm

BRISBANE HEAD OFFICE & FACTORY
11-15 Oasis Court, Clontarf, QLD 4019
Ph: 07 3284 3284 | 1300 663 868
Email: [e-mail]
MELBOURNE SHOW ROOM
235 Barry Rd, Campbelleld VIC 3061
Ph: 03 9357 6565 | 1300 663 868
Email: [e-mail]
2: Fit The AFK
Drill a 10mm (3/8”) hole 20mm in
from the fabric edge and 20mm down
from the underside of the fabric on
both ends of the roller tube.
Fit the wall bracket at either end under
the the awning fabric.
The centre of the wall bracket should
be 20mm down from the underside of
the fabric.
The edge of the slot in the bracket and
the point of the curve nishes should
be in line with the fabric edge.
Rule of thumb: If the awning fabric has
been mounted on the van with double
sided sailtrack, the wall bracket will
normally t on the boom edge of the
track under the fabric.