User Manual

When the water tank is full, the indication lamp will light up and the dehumidifier will stop
operating. Remove the water from the tank, then place the water tank back to it's proper
position. The machine will start operating again.
● When “Bucket Full” Lamp Is On
●
DEFROST
When operating in low temperatures (below 20ºC) the surface of the condensing coil may
accumulate frost and affect the efficiency of the dehumidifier. When this happens, the
machine will go into periodic defrost mode automatically. This is quite normal. Defrost lamp
will come on during the defrost period. Defrost time may vary depending on the room
temperature and humidity.
7
OPERATING INSTRUCTIONS
2) Make sure the water tank is placed in proper position (when plugged
in for the first time the full tank lamp may light up. If so, just pull out
the water tank then push it back to the proper position).
3) Press the power control to turn on the machine. Press to select humidity setting.
If the indoor humidity is over the set humidity, the machine will start removing moisture. When
the humidity in the room has reached the set humidity, the machine will stop operating. When
the indoor humidity is greater than the set humidity, the machine will start removing moisture
again.
" "
● Start Operation
1) Ensure that the unit is connected to the power socket.