USER MANUAL Ausclimate Cool Seasons 10L Desiccant Dehumidifier Model: AU1000DD Please read this user manual before operating
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING. WARNING - This appliance is intended for use in a domestic or office environment only. Any other use is not recommended by the manufacturer and may cause fire, electrical shocks or other injury to person or property. When using electrical appliances, basic safety precautions should always be followed: 1.
FEATURES (Non) Compressor dehumidifier ~ uses desiccant rotor technology Environmentally friendly with no harmful gasses & quiet in operation Moisture removal ~ 10 litres/day (20 C, 60% RH) Water tank capacity ~ 3.
PRODUCTDESCRIPTION Auto-swing louver Sub-louver for downward blowing Control panel Adjustable blades Air outlet Handle Air filter Water level indicator Continuous drain hole Air inlet Hand grip to pull out the bucket Bucket Plug THE CONTROL PANEL Timer key Louver settings Control key Continuous / Laundry Mode key 8H TIMER 4H 2H Wide SWING Front Up LAUNDRY MODE Dry Mode key Saving Function indicators Low Auto Full Power Key Louver setting indicators Turbo High DRY MODE Timer indicators
UNIT SETUP Place the unit in an upright position on a stable, flat surface. Ensure the unit is a safe distance away from a wall or furniture (see the right graphic). Keep clothes at a safe distance of 40 cm from air outlet of the unit to prevent water dripping into the unit. Where to position your dehumidifier? For best results position the dehumidifier somewhere central, such as the middle of the room or a hallway. Do not position in front of a radiator or in direct sunlight.
OPERATING INSTRUCTIONS ON and OFF 8H Connect the power plug to the appropriate electrical socket outlet. Press the ON/OFF button to turn the unit ON. Press the ON/OFF button again to turn the unit OFF. TIMER 2H Wide Note: In the event of a power failure SWING Once the power is restored after a power failure, the unit will continue to operate at the selected settings prior to the power failure. This includes the drying mode, swing function and time remaining in timer mode.
OPERATING INSTRUCTIONS LAUNDRY MODE Press the "LAUNDRY MODE" key for drying clothes. SAVING TURBO DESCRIPTION MODE SAVING TURBO Suitable for warmer temperatures to save power The unit automatically provides warm dry air to assist in clothes drying with low power. Suitable in cooler winter temperatures to dry clothes faster The unit automatically provides heated air to dry clothes faster with higher power. AUTO SWING LOUVER Press the "SWING" Key to select the preferred air louver angle.
OPERATING INSTRUCTIONS WIDE / SPOT ADJUSTABLE LOUVER Wide blowing -adjust the blades outwards for an expanded airflow. Spot blowing -adjust the blades inwards for a spot airflow. DOWNWARD LOUVER ADJUSTMENT A sub-louver under the main louver can be moved out for blowing air downward further.
TO EMPTY THE WATER BUCKET 1. When the water bucket is full, the "FULL" LED lights up and the unit stops within a few minutes. 2. Do not move the unit or remove the water bucket if the machine is still operating. Water may leak and cause damage to the unit or cause an electric shock. 3. To remove the water bucket, pull it out by gripping the bottom of the bucket, and lift carefully. 4. Remove the cover of water bucket first, then pour the water away.
MAINTENANCE Cleaning the unit 1. 2. 3. 4. Turn off the unit, wait for the fan to stop and unplug from the power socket. Clean the surface with a soft damp cloth. Dry thoroughly with a towel after cleaning. To avoid damage, do not wash or splash the unit with water, or let water drip into the air inlet or air outlet. Cleaning the nano-silver air filter If the nano-silver air filter is covered with dust, the airflow and general performance of the unit may be affected.
TROUBLE-SHOOTING Check the following before contacting technical support: Problem Cause The power is not connected. The unit does not Power cord or power plug may be operate. damaged. The device does not dehumidify. Solution Insert power plug into the power socket. Inspect power cord and power plug for damage. If damaged, do not use - contact the retailer or distributor for advice. The water container is full. Empty the water from the container. The water bucket has not been replaced correctly.
SPECIFICATIONS Model Power supply Power input Dehumidifying capacity Recommended room size AU1000DD AC 220-240V, 50Hz Low 410watts / High 720watts 10 litres/day (20°C@60%RH) 50m2 or 125m3 Capacity water container Operating range Dimensions (w x d x h) Noise levels Power control Desiccant Drain hose Net weight 3.8 litres 1 – 40°C W462 x D217 x H525mm Low 45, High 52 dBA Easy soft touch Zeolite 1.2M provided 8.
