Operator`s manual

Installation and Operator’s Manual Page 51 of 62

(PVI-2000-OUTD-UK

Rev: 1.0)

6.6 Baud Rate setting

1) After the inverter address have been defined according to the procedure

included in paragraph 6.5 or 6.6, if the button at the right side of the LCD

is pushed continuously for at least 5 sec and then released the display

menu enters in the Baud Rate setting.

3) The display will show the wording “SET BAUD RATE” and the default

baud rate setting of: 19200

4) To confirm the baud rate setting displayed just push the button firmly for

another 5 sec period.

5) conversely to show the other baud rate setting options just shortly push

the button

SET BAUD RATE

19200

NEW ADDRESS

SET BAUD RATE

9600

SET BAUD RATE

4800

SET BAUD RATE

2400