Operator`s manual

Installation and Operator’s Manual Page 38 of 62
(PVI-2000-OUTD-UK
Rev: 1.0)
5.5 LCD Display
The 2-line LCD display is located on the front panel and shows:
9 the status of the inverter and statistical data;
9 service messages for the operator;
9 messages of faults or damages found.
Data are shown cyclically, the screens change every 5 seconds. On the right of the
display there is a button that when pressed freezes the screen. Pushing the button
again unfreezes the screen. When AURORA is turned on the display shows the
following screen for about 10 seconds:
Afterwards it begins to check the grid. While checking the grid the display shows
the three following screens cyclically:
9 This screen shows how many seconds are left before a new grid connection
attempt will start.
9 The following screen shows the measured value of the insulation resistance:
Initializing......
Please Wait
Next Connection
10 s
Measuring Riso
……………