Operator`s manual

Installation and Operator’s Manual Page 26 of 62
(PVI-2000-OUTD-UK
Rev: 1.0)
3.7 Access to the terminal blocks by removing the right side panel
WA
RNING: To avoid the risk of electric shock from energy stored in
capacitors. Wait 5 minutes after disconnecting both Ac and Dc
connections before opening the side panel.
To remove the side panel unscrew it using the Torx TX20 wrench supplied with
the inverter kit.
Fig.13: Removing the side panel
WARNING: after operation the side panel screws shall be tightened
with a torque of 1.5 Nm (13.2 in-lbs) to ensure watertight sealing.