Installation guide

About the PVX Utility
C-14 PCI-SB StarFabric PCI Interface Card Installation Guide
Scanning for StarFabric Devices
The Scan option available from the Tools menu lets you quickly view a list of all
the StarFabric-enabled peripheral devices installed and attached to the StarFabric-
enabled device on the primary PCI bus in your topology.
To scan all devices in your topology:
1. Select Tools -> Scan from the menu bar, as shown in Figure 49.
Or:
Type Alt-S from the user interface window.
FIGURE 49. Selecting the Scan Tool
A scrolling list appears showing all the components attached to the primary PCI
bus over the StarFabric, as shown in Figure 50 on page C-15.